PartsTable
Technical Data Sheet
Download PDF

DIN127M10 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

DIN127M10: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 10.2 MILLIMETERS MINIMUM AND 10.8 MILLIMETERS MAXIMUM MM, hardness_rating: 44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM, outside_diameter: 18.1 MILLIMETERS NOMINAL MM, style_designator: SPLIT HELICAL-RIGHT HAND, material_thickness: 2.20 MILLIMETERS MINIMUM AND 2.35 MILLIMETERS MAXIMUM MM. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-160-2053, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DIN127M10
NSN: 5310-01-160-2053
NIINs: 011602053, 016020345
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter10.2 MILLIMETERS MINIMUM AND 10.8 MILLIMETERS MAXIMUM MM
hardness_rating44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
outside_diameter18.1 MILLIMETERS NOMINAL MM
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness2.20 MILLIMETERS MINIMUM AND 2.35 MILLIMETERS MAXIMUM MM
NSN5310-01-160-2053
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DIN127M10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 18.1 MILLIMETERS NOMINAL MM
•
MATERIAL THICKNESS: 2.20 MILLIMETERS MINIMUM AND 2.35 MILLIMETERS MAXIMUM MM
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 10.2 MILLIMETERS MINIMUM AND 10.8 MILLIMETERS MAXIMUM MM
TECHNICAL CHARACTERISTICS
HARDNESS RATING44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER18.1 MILLIMETERS NOMINAL MM
MATERIAL THICKNESS2.20 MILLIMETERS MINIMUM AND 2.35 MILLIMETERS MAXIMUM MM
MATERIALSTEEL OVERALL
HOLE DIAMETER10.2 MILLIMETERS MINIMUM AND 10.8 MILLIMETERS MAXIMUM MM
SUBSTITUTES & CROSS-REFERENCES 1
PS-020045Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy DIN127M10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DIN127M10?
DIN127M10 is a WASHER,LOCK.
What parts can replace DIN127M10?
There is 1 known substitute for DIN127M10: PS-020045. Substitute compatibility should be verified for your specific system.
What is the NSN for DIN127M10?
DIN127M10 is cataloged in the U.S. Government catalog under NSN 5310-01-160-2053. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DIN127M10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.