PartsTable
Technical Data Sheet
Download PDF

DIN125A-ZY 10 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

DIN125A-ZY 10: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 2.0 MILLIMETERS NOMINAL MM, hole_diameter: 10.5 MILLIMETERS NOMINAL MM, overall_diameter: 20.0 MILLIMETERS NOMINAL MM, surface_treatment: ZINC OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-470-1373, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DIN125A-ZY 10
NSN: 5310-01-470-1373
FSC: 5310 — Nuts and Washers
CAGE: D8286 — DIN DEUTSCHES INSTITUT FUR NORMUNG EV (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
thickness2.0 MILLIMETERS NOMINAL MM
hole_diameter10.5 MILLIMETERS NOMINAL MM
overall_diameter20.0 MILLIMETERS NOMINAL MM
surface_treatmentZINC OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identification6115-01-462-0291;6115-01-461-9335
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-470-1373
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DIN125A-ZY 10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 20.0 MILLIMETERS NOMINAL MM
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
COLOR: YELLOW OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER20.0 MILLIMETERS NOMINAL MM
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
COLORYELLOW OVERALL
SURFACE TREATMENTZINC OVERALL
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATION6115-01-462-0291;6115-01-461-9335
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER10.5 MILLIMETERS NOMINAL MM
THICKNESS2.0 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 3
96-23612-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
96-23612Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
125AZY-10MSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy DIN125A-ZY 10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DIN125A-ZY 10?
DIN125A-ZY 10 is a WASHER,FLAT.
What parts can replace DIN125A-ZY 10?
There are 3 known substitutes for DIN125A-ZY 10: 96-23612-1, 96-23612, 125AZY-10M. Substitute compatibility should be verified for your specific system.
What is the NSN for DIN125A-ZY 10?
DIN125A-ZY 10 is cataloged in the U.S. Government catalog under NSN 5310-01-470-1373. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DIN125A-ZY 10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.