DIN 912-M5X8: SCREW,CAP,SOCKET HEAD.
The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 4.82 MILLIMETERS MINIMUM AND 5.00 MILLIMETERS MAXIMUM MM, head_diameter: 8.28 MILLIMETERS MINIMUM AND 8.50 MILLIMETERS MAXIMUM MM, thread_length: 6.4 MILLIMETERS MINIMUM AND 8.0 MILLIMETERS MAXIMUM MM, fastener_length: 8.00 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.
Government catalog under NSN 5305-01-154-9550, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL OVERALL |
| head_style | FLAT CHAMFER |
| head_height | 4.82 MILLIMETERS MINIMUM AND 5.00 MILLIMETERS MAXIMUM MM |
| head_diameter | 8.28 MILLIMETERS MINIMUM AND 8.50 MILLIMETERS MAXIMUM MM |
| thread_length | 6.4 MILLIMETERS MINIMUM AND 8.0 MILLIMETERS MAXIMUM MM |
| fastener_length | 8.00 MILLIMETERS NOMINAL MM |
| hardness_rating | 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL |
| thread_direction | RIGHT-HAND |
| width_across_flats | 4.03 MILLIMETERS MINIMUM AND 4.15 MILLIMETERS MAXIMUM MM |
| internal_drive_style | HEXAGON |
| nominal_thread_diameter | 5.0 MILLIMETERS MM |
| minimum_tensile_strength | 113000 POUNDS PER SQUARE INCH LBS |
| NSN | 5305-01-154-9550 |
| WIDTH ACROSS FLATS | 4.03 MILLIMETERS MINIMUM AND 4.15 MILLIMETERS MAXIMUM MM |
| HEAD HEIGHT | 4.82 MILLIMETERS MINIMUM AND 5.00 MILLIMETERS MAXIMUM MM |
| FASTENER LENGTH | 8.00 MILLIMETERS NOMINAL MM |
| THREAD PITCH IN MILLIMETERS | 0.8 |
| THREAD LENGTH | 6.4 MILLIMETERS MINIMUM AND 8.0 MILLIMETERS MAXIMUM MM |
| HARDNESS RATING | 18.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 8.8 DIN 912 FSCM 15526 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| NOMINAL THREAD DIAMETER | 5.0 MILLIMETERS MM |
| HEAD STYLE | FLAT CHAMFER |
| THREAD DIRECTION | RIGHT-HAND |