PartsTable
Technical Data Sheet
Download PDF

DIN 6926-M5-8 — NUT,SELF-LOCKING,EXTENDED WASHER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

DIN 6926-M5-8: NUT,SELF-LOCKING,EXTENDED WASHER.

NUT,SELF-LOCKING,EXTENDED WASHER. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, thread_series: ISO M, overall_height: 4.7 MILLIMETERS MINIMUM MM, locking_feature: PREVAILING TORQUE WITH NONMETALLIC INSERT, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-383-8817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DIN 6926-M5-8
NSN: 5310-01-383-8817
FSC: 5310 — Nuts and Washers
CAGE: 64678 — DAIMLER TRUCK NORTH AMERICA LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
thread_seriesISO M
overall_height4.7 MILLIMETERS MINIMUM MM
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
washer_thickness1.0 MILLIMETERS MINIMUM MM
width_across_flats8.0 MILLIMETERS NOMINAL MM
nominal_thread_size5.0 MILLIMETERS MM
thread_tolerance_class6H INTERNAL
washer_outside_diameter11.8 MILLIMETERS MAXIMUM MM
thread_pitch_in_millimeters0.80
NSN5310-01-383-8817
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DIN 6926-M5-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 11.8 MILLIMETERS MAXIMUM MM
•
WIDTH ACROSS FLATS: 8.0 MILLIMETERS NOMINAL MM
•
THREAD TOLERANCE CLASS: 6H INTERNAL
•
THREAD SERIES: ISO M
•
THREAD PITCH IN MILLIMETERS: 0.80
•
WASHER THICKNESS: 1.0 MILLIMETERS MINIMUM MM
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT4.7 MILLIMETERS MINIMUM MM
WASHER OUTSIDE DIAMETER11.8 MILLIMETERS MAXIMUM MM
WIDTH ACROSS FLATS8.0 MILLIMETERS NOMINAL MM
THREAD TOLERANCE CLASS6H INTERNAL
THREAD SERIESISO M
THREAD PITCH IN MILLIMETERS0.80
WASHER THICKNESS1.0 MILLIMETERS MINIMUM MM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE5.0 MILLIMETERS MM
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
DIN EN1666Reference document
Same NSN cross-reference
Reference document — Secondary reference
DIN EN1663-M5-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DIN 6926-M5-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DIN 6926-M5-8?
DIN 6926-M5-8 is a NUT,SELF-LOCKING,EXTENDED WASHER.
What parts can replace DIN 6926-M5-8?
There are 2 known substitutes for DIN 6926-M5-8: DIN EN1666, DIN EN1663-M5-8. Substitute compatibility should be verified for your specific system.
What is the NSN for DIN 6926-M5-8?
DIN 6926-M5-8 is cataloged in the U.S. Government catalog under NSN 5310-01-383-8817. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DIN 6926-M5-8