PartsTable
Technical Data Sheet
Download PDF

DIMFAB 280 — PAD,CUSHIONING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

DIMFAB 280: PAD,CUSHIONING.

The PAD,CUSHIONING is a the manufacturer industrial component. Key specifications include width: 3.5000 INCHES NOMINAL IN, length: 6.5000 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHIONING, thickness: 0.3280 INCHES NOMINAL IN, special_features: THERE IS A HOLES WITH A DIA. OF 1.031 WITH VAR.

OF PLUS 0.063 IN. IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-406-1262, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DIMFAB 280
NSN: 5340-01-406-1262
FSC: 5340 — Hardware, Commercial
CAGE: 73015 — FABREEKA INTERNATIONAL, INC DIV FABREEKA STOUGHTON (USA)
SPECIFICATIONS
width3.5000 INCHES NOMINAL IN
length6.5000 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR CUSHIONING
thickness0.3280 INCHES NOMINAL IN
special_featuresTHERE IS A HOLES WITH A DIA. OF 1.031 WITH VAR. OF PLUS 0.063 IN. IN
NSN5340-01-406-1262
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DIMFAB 280 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 6.5000 INCHES NOMINAL IN
•
WIDTH: 3.5000 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR CUSHIONING
•
THICKNESS: 0.3280 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH6.5000 INCHES NOMINAL IN
SPECIAL FEATURESTHERE IS A HOLES WITH A DIA. OF 1.031 WITH VAR. OF PLUS 0.063 IN. IN
WIDTH3.5000 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR CUSHIONING
THICKNESS0.3280 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 4
TAD 1008-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
B13-8353-XTLReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
15-2676-53Reference document
Same NSN cross-reference
Reference document — Secondary reference
B13-8355-XTLSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy DIMFAB 280?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DIMFAB 280?
DIMFAB 280 is a PAD,CUSHIONING.
What parts can replace DIMFAB 280?
There are 4 known substitutes for DIMFAB 280: TAD 1008-2, B13-8353-XTL, 15-2676-53 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DIMFAB 280?
DIMFAB 280 is cataloged in the U.S. Government catalog under NSN 5340-01-406-1262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DIMFAB 280