PartsTable
Technical Data Sheet
Download PDF

DIE539 — SEAL,NONMETALLIC CHANNEL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

DIE539: SEAL,NONMETALLIC CHANNEL.

The SEAL,NONMETALLIC CHANNEL is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, web_width: 0.120 INCHES NOMINAL IN, construction: SOLID, web_thickness: 0.030 INCHES NOMINAL IN, left_tip_style: LEFT SQUARE END, style_designator: STRIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-477-4868, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DIE539
NSN: 5330-00-477-4868
FSC: 5330 — Packing and Gasket Materials
CAGE: 6T589 — WABTEC COMPONENTS LLC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
web_width0.120 INCHES NOMINAL IN
constructionSOLID
web_thickness0.030 INCHES NOMINAL IN
left_tip_styleLEFT SQUARE END
style_designatorSTRIP
left_inside_angle90.0 DEGREES NOMINAL
left_outside_angle90.0 DEGREES NOMINAL
right_inside_angle90.0 DEGREES NOMINAL
right_outside_angle90.0 DEGREES NOMINAL
left_side_flange_height0.120 INCHES NOMINAL IN
right_side_flange_height0.120 INCHES NOMINAL IN
NSN5330-00-477-4868
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DIE539 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RIGHT OUTSIDE ANGLE: 90.0 DEGREES NOMINAL
•
LEFT TIP STYLE: LEFT SQUARE END
•
LEFT SIDE FLANGE THICKNESS AT WEB: 0.030 INCHES NOMINAL IN
•
LEFT SIDE FLANGE HEIGHT: 0.120 INCHES NOMINAL IN
•
RIGHT SIDE FLANGE THICKNESS AT WEB: 0.030 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3345 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: OPEN CHANNEL
TECHNICAL CHARACTERISTICS
RIGHT OUTSIDE ANGLE90.0 DEGREES NOMINAL
LEFT TIP STYLELEFT SQUARE END
LEFT SIDE FLANGE THICKNESS AT WEB0.030 INCHES NOMINAL IN
LEFT SIDE FLANGE HEIGHT0.120 INCHES NOMINAL IN
RIGHT SIDE FLANGE THICKNESS AT WEB0.030 INCHES NOMINAL IN
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3345 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEOPEN CHANNEL
LEFT SIDE FLANGE THICKNESS0.030 INCHES NOMINAL IN
RIGHT SIDE FLANGE HEIGHT0.120 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DIE539?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DIE539?
DIE539 is a SEAL,NONMETALLIC CHANNEL.
What is the NSN for DIE539?
DIE539 is cataloged in the U.S. Government catalog under NSN 5330-00-477-4868. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DIE539

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.