DIE PA4530 — SUPPORT,STRUCTURAL COMPONENT,AIR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

DIE PA4530: SUPPORT,STRUCTURAL COMPONENT,AIR.

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 7075, overall_width: 3.000 INCHES NOMINAL IN, heat_treatment: T-6 SOLUTION HEAT TREATED, overall_height: 2.000 INCHES NOMINAL IN, first_tip_style: RIGHT QUARTER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-805-5995, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

DIE PA4530

NSN: 9540-00-805-5995
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 06012 — TRANSTAR METALS CORP (USA)

SPECIFICATIONS

length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 7075
overall_width	3.000 INCHES NOMINAL IN
heat_treatment	T-6 SOLUTION HEAT TREATED
overall_height	2.000 INCHES NOMINAL IN
first_tip_style	RIGHT QUARTER RADIUS
first_tip_radius	0.188 INCHES NOMINAL IN
second_tip_style	UPPER RADIUS
basic_shape_style	ANGLE
left_inside_angle	90.0 DEGREES NOMINAL
second_tip_radius	0.188 INCHES NOMINAL IN
fabrication_method	EXTRUDED
NSN	9540-00-805-5995

COMPONENT DIAGRAM

KEY FEATURES

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

BASE FLANGE THICKNESS: 0.188 INCHES NOMINAL IN

•

HEAT TREATMENT: T-6 SOLUTION HEAT TREATED

•

FIRST TIP RADIUS: 0.188 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE

•

LEFT SIDE FLANGE THICKNESS: 0.188 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	2.000 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
BASE FLANGE THICKNESS	0.188 INCHES NOMINAL IN
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
FIRST TIP RADIUS	0.188 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL WIDTH	3.000 INCHES NOMINAL IN
LEFT SIDE FLANGE THICKNESS	0.188 INCHES NOMINAL IN
SECOND TIP RADIUS	0.188 INCHES NOMINAL IN
BASIC SHAPE STYLE	ANGLE

SUBSTITUTES & CROSS-REFERENCES 8

LS3209-3Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

DIE 734-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

DIE 60-3901Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ASTM B221Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

13677-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy DIE PA4530?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is DIE PA4530?

DIE PA4530 is a SUPPORT,STRUCTURAL COMPONENT,AIR.

What parts can replace DIE PA4530?

There are 8 known substitutes for DIE PA4530: LS3209-3, DIE 734-1, DIE 60-3901 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for DIE PA4530?

DIE PA4530 is cataloged in the U.S. Government catalog under NSN 9540-00-805-5995. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

DIE PA4530 — SUPPORT,STRUCTURAL COMPONENT,AIR

Request a Quote — DIE PA4530