DHBE 4-101 — BEARING,PLAIN,ROD END

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

DHBE 4-101: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY RACE INSERT, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM IN, overall_length: 1.9530 INCHES NOMINAL IN, thread_diameter: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-516-0988, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

DHBE 4-101

NSN: 3120-00-516-0988
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 02758 — U S BEARINGS (USA)

SPECIFICATIONS

material	COPPER ALLOY RACE INSERT
shank_style	EXTERNALLY THREADED
thread_class	3A A
bore_diameter	0.2495 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM IN
overall_length	1.9530 INCHES NOMINAL IN
thread_diameter	0.312 INCHES NOMINAL IN
special_features	IDENTIFIED WITH MAGNETIC INSPECTION STAMP /100 PCT MAGNETIC INSPECTED/
style_designator	BALL TYPE
thread_direction	RIGHT-HAND
surface_treatment	CHROMIUM INNER MEMBER
inner_member_width	0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
outer_member_width	0.3125 INCHES MAXIMUM IN
NSN	3120-00-516-0988

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK THREAD LENGTH: 1.0000 INCHES NOMINAL IN

•

BORE CENTER TO SHANK END DISTANCE: 1.5620 INCHES NOMINAL IN

•

INNER MEMBER WIDTH: 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN

•

OUTER MEMBER WIDTH: 0.3125 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: BALL TYPE

•

THREAD DIAMETER: 0.312 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE INTERNAL ROD END BODY

TECHNICAL CHARACTERISTICS

SHANK THREAD LENGTH	1.0000 INCHES NOMINAL IN
BORE CENTER TO SHANK END DISTANCE	1.5620 INCHES NOMINAL IN
INNER MEMBER WIDTH	0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
OUTER MEMBER WIDTH	0.3125 INCHES MAXIMUM IN
STYLE DESIGNATOR	BALL TYPE
THREAD DIAMETER	0.312 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE INTERNAL ROD END BODY
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE INNER MEMBER
OVERALL LENGTH	1.9530 INCHES NOMINAL IN
THREAD DIRECTION	RIGHT-HAND

SUBSTITUTES & CROSS-REFERENCES 3

KB4ESame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

CRBE-4-16Reference document

Same NSN cross-reference

Reference document — Secondary reference

01-521-04Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy DHBE 4-101?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is DHBE 4-101?

DHBE 4-101 is a BEARING,PLAIN,ROD END.

What parts can replace DHBE 4-101?

There are 3 known substitutes for DHBE 4-101: KB4E, CRBE-4-16, 01-521-04. Substitute compatibility should be verified for your specific system.

What is the NSN for DHBE 4-101?

DHBE 4-101 is cataloged in the U.S. Government catalog under NSN 3120-00-516-0988. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

DHBE 4-101 — BEARING,PLAIN,ROD END

Request a Quote — DHBE 4-101