PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DH37D-6
DH37D-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 4.008 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-065-4835, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DH37D-6
NSN: 5330-00-065-4835
FSC: 5330
CAGE: 16712 — SIEMENS ENERGY, INC. (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.375 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter4.008 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter4.003 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter3.125 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-065-4835
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DH37D-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 4.008 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
HOUSING BORE DIAMETER: 4.003 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT B
•
CASE STYLE: RECESSED
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 3.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER4.008 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR-OPPOSED
HOUSING BORE DIAMETER4.003 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
MATERIALSTEEL CASE
CASE STYLERECESSED
SEAL WIDTH0.375 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER3.125 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
D31138Interchangeable
interchangeable cross-reference
interchangeable
31138Interchangeable
interchangeable cross-reference
interchangeable
5303-812Interchangeable
interchangeable cross-reference
interchangeable
B26-4Interchangeable
interchangeable cross-reference
interchangeable
55525Interchangeable
interchangeable cross-reference
interchangeable
4322 39Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DH37D-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DH37D-6?
DH37D-6 is a SEAL,PLAIN ENCASED.
What parts can replace DH37D-6?
There are 16 known substitutes for DH37D-6: D31138, 31138, 5303-812 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DH37D-6?
DH37D-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-065-4835. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DH37D-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026