PartsTable
Technical Data Sheet
Download PDF

DG51T60 — CONNECTOR,RECEPTACLE,ELECTRICAL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

DG51T60: CONNECTOR,RECEPTACLE,ELECTRICAL.

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL COMP 303SE OVERALL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STUB, pitch_diameter: 0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-012-0073, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DG51T60
NSN: 3020-00-012-0073
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 29964 — ALLIED DEVICES CORP DBA ABSOLUTE PRECISION CO (USA)
SPECIFICATIONS
materialSTEEL COMP 303SE OVERALL
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
tooth_formSTUB
pitch_diameter0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
pressure_angle20.0000 DEGREES
teeth_quantity60
style_designatorPROTRUDING HUB
surface_treatmentPASSIVATE OVERALL
face_nominal_width0.062 INCHES IN
hub_nominal_diameter0.312 INCHES FIRST END IN
hub_style_designatorPINNED FIRST END
NSN3020-00-012-0073
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CONNECTOR,RECEPTACLE,ELECTRICAL TITLE COMPONENT PN DG51T60 MFR CONNECTOR,RECEPTACLE,E
KEY FEATURES
•
BORE NOMINAL DIAMETER: 0.125 INCHES BOTH ENDS IN
•
HUB NOMINAL DIAMETER: 0.312 INCHES FIRST END IN
•
TEETH QUANTITY: 60
•
BODY STYLE: PLAIN, SOLID
•
BORE STYLE: PLAIN BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.188 INCHES FIRST END IN
•
STYLE DESIGNATOR: PROTRUDING HUB
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,CLASS303SE FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER0.125 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER0.312 INCHES FIRST END IN
TEETH QUANTITY60
BODY STYLEPLAIN, SOLID
BORE STYLEPLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.188 INCHES FIRST END IN
STYLE DESIGNATORPROTRUDING HUB
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,CLASS303SE FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
TOOTH FORMSTUB
SUBSTITUTES & CROSS-REFERENCES 3
B7-60Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
20596Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
P96S5-60Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DG51T60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DG51T60?
DG51T60 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace DG51T60?
There are 3 known substitutes for DG51T60: B7-60, 20596, P96S5-60. Substitute compatibility should be verified for your specific system.
What is the NSN for DG51T60?
DG51T60 is cataloged in the U.S. Government catalog under NSN 3020-00-012-0073. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DG51T60