DG180AP/883 — MICROCIRCUIT,LINEAR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

DG180AP/883: MICROCIRCUIT,LINEAR.

The MICROCIRCUIT,LINEAR is a the manufacturer industrial component. Key specifications include body_width: 0.310 INCHES MAXIMUM IN, body_height: 0.185 INCHES MAXIMUM IN, body_length: 0.785 INCHES MAXIMUM IN, features_provided: MONOLITHIC AND HIGH SPEED, inclosure_material: CERAMIC, storage_temp_range: -65.0 TO 150.0 CELSIUS DEGC. This part is cataloged in the U.S.

Government catalog under NSN 5962-01-127-1923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

DG180AP/883

NSN: 5962-01-127-1923
NIINs: 011271923, 013227151
FSC: 5962 — Microcircuits, Electronic
CAGE: 17856 — SILICONIX INCORPORATED DIV SILICONIX (USA)

SPECIFICATIONS

body_width	0.310 INCHES MAXIMUM IN
body_height	0.185 INCHES MAXIMUM IN
body_length	0.785 INCHES MAXIMUM IN
features_provided	MONOLITHIC AND HIGH SPEED
inclosure_material	CERAMIC
storage_temp_range	-65.0 TO 150.0 CELSIUS DEGC
test_data_document	96906-MIL-STD-883 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
operating_temp_range	-55.0 TO 125.0 CELSIUS DEGC
input_circuit_pattern	DUAL 2 INPUT
end_item_identification	PO OK-398 05869
inclosure_configuration	DUAL-IN-LINE
terminal_surface_treatment	SOLDER
NSN	5962-01-127-1923

COMPONENT DIAGRAM

KEY FEATURES

•

INPUT CIRCUIT PATTERN: DUAL 1 INPUT

•

INCLOSURE MATERIAL: CERAMIC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

DESIGN FUNCTION AND QUANTITY: 2 SWITCH, ANALOG, SINGLE POLE SINGLE THROW NORMALLY OPEN

•

BODY WIDTH: 0.275 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN

•

BODY HEIGHT: 0.080 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN

•

FEATURES PROVIDED: HERMETICALLY SEALED AND HIGH SPEED AND HIGH FREQUENCY

•

INCLOSURE CONFIGURATION: DUAL-IN-LINE

TECHNICAL CHARACTERISTICS

INPUT CIRCUIT PATTERN	DUAL 1 INPUT
INCLOSURE MATERIAL	CERAMIC
TERMINAL SURFACE TREATMENT	SOLDER
DESIGN FUNCTION AND QUANTITY	2 SWITCH, ANALOG, SINGLE POLE SINGLE THROW NORMALLY OPEN
BODY WIDTH	0.275 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
BODY HEIGHT	0.080 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
FEATURES PROVIDED	HERMETICALLY SEALED AND HIGH SPEED AND HIGH FREQUENCY
INCLOSURE CONFIGURATION	DUAL-IN-LINE
BODY LENGTH	0.640 INCHES MINIMUM AND 0.786 INCHES MAXIMUM IN
STORAGE TEMP RANGE	-65.0 TO 125.0 CELSIUS DEGC

SUBSTITUTES & CROSS-REFERENCES 5

DG180AP/883BReference document

Same NSN cross-reference

Reference document — Secondary reference

725004-153Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

231427-001Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

3451708-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

SM-A-984986Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedDemilitarization required — critical (Q)

Ready to buy DG180AP/883?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is DG180AP/883?

DG180AP/883 is a MICROCIRCUIT,LINEAR.

What parts can replace DG180AP/883?

There are 5 known substitutes for DG180AP/883: DG180AP/883B, 725004-153, 231427-001 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for DG180AP/883?

DG180AP/883 is cataloged in the U.S. Government catalog under NSN 5962-01-127-1923. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

DG180AP/883 — MICROCIRCUIT,LINEAR

Request a Quote — DG180AP/883