PartsTable
Technical Data Sheet
Download PDF

DFNP6010-4 — NUT,SELF-LOCKING,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

DFNP6010-4: NUT,SELF-LOCKING,PLATE.

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include nut_height: 0.175 INCHES MAXIMUM IN, nut_length: 0.948 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, plate_width: 0.416 INCHES MAXIMUM IN, thread_class: 3B, locking_feature: PREVAILING TORQUE ALL METAL DESIGN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-050-5010, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DFNP6010-4
NSN: 5310-01-050-5010
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
nut_height0.175 INCHES MAXIMUM IN
nut_length0.948 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
plate_width0.416 INCHES MAXIMUM IN
thread_class3B
locking_featurePREVAILING TORQUE ALL METAL DESIGN
plate_thickness0.020 INCHES NOMINAL IN
special_featuresCOLOR IDENTIFICATION ORANGE
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
mounting_hole_diameter0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
nut_mounting_provisionSTRAIGHT HOLES
NSN5310-01-050-5010
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DFNP6010-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
PLATE THICKNESS: 0.020 INCHES NOMINAL IN
•
NUT LENGTH: 0.948 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
PLATE WIDTH: 0.416 INCHES MAXIMUM IN
•
MOUNTING HOLE DIAMETER: 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER: 0.344 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
PLATE THICKNESS0.020 INCHES NOMINAL IN
NUT LENGTH0.948 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
PLATE WIDTH0.416 INCHES MAXIMUM IN
MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.344 INCHES NOMINAL IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
DFNP6010-04Reference document
Same NSN cross-reference
Reference document — Secondary reference
136122-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DFNP6010-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DFNP6010-4?
DFNP6010-4 is a NUT,SELF-LOCKING,PLATE.
What parts can replace DFNP6010-4?
There are 2 known substitutes for DFNP6010-4: DFNP6010-04, 136122-1. Substitute compatibility should be verified for your specific system.
What is the NSN for DFNP6010-4?
DFNP6010-4 is cataloged in the U.S. Government catalog under NSN 5310-01-050-5010. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DFNP6010-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.