PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DF330645 FIND 46
DF330645 FIND 46 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC EPOXY AND PAPER OVERALL, joint_type: SCARF-BUTT RETAINER, peripheral_diameter: 0.990 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN, center_hole_diameter: 0.750 INCHES NOMINAL IN, distance_between_ends: 0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-5897, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DF330645 FIND 46
NSN: 5330-00-171-5897
FSC: 5330
CAGE: 43689 — HUNTINGTON INGALLS INC DIV NEWPORT NEWS SHIPBUILDING (USA)
SPECIFICATIONS
angle25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
materialPLASTIC EPOXY AND PAPER OVERALL
joint_typeSCARF-BUTT RETAINER
peripheral_diameter0.990 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
center_hole_diameter0.750 INCHES NOMINAL IN
distance_between_ends0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
cross-sectional_height0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
cross-sectional_thickness0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-171-5897
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DF330645 FIND 46 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
CENTER HOLE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DISTANCE BETWEEN ENDS: 0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
JOINT TYPE: SCARF-BUTT RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESQUARE
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
CENTER HOLE DIAMETER0.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
DISTANCE BETWEEN ENDS0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
JOINT TYPESCARF-BUTT RETAINER
MATERIALPLASTIC EPOXY AND PAPER OVERALL
PERIPHERAL DIAMETER0.990 INCHES MINIMUM AND 0.994 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
600782Interchangeable
interchangeable cross-reference
interchangeable
606782Interchangeable
interchangeable cross-reference
interchangeable
237.92Interchangeable
interchangeable cross-reference
interchangeable
98-2187Interchangeable
interchangeable cross-reference
interchangeable
845-7286645 ITEM 68Interchangeable
interchangeable cross-reference
interchangeable
7550478-264382003-068CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy DF330645 FIND 46?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DF330645 FIND 46?
DF330645 FIND 46 is a RETAINER,PACKING.
What parts can replace DF330645 FIND 46?
There are 14 known substitutes for DF330645 FIND 46: 600782, 606782, 237.92 and 11 more. Substitute compatibility should be verified for your specific system.
Is DF330645 FIND 46 still available?
DF330645 FIND 46 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DF330645 FIND 46

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026