PartsTable
Technical Data Sheet
Download PDF

DEJ7900-6-3 — SCREW ASSEMBLY,PANEL

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

DEJ7900-6-3: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 SPRING, head_style: PAN NO. 2, head_height: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-340-5065, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DEJ7900-6-3
NSN: 5305-01-340-5065
FSC: 5305 — Screws
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 302 SPRING
head_stylePAN NO. 2
head_height0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
fastener_length0.594 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
internal_drive_styleSLOT
nominal_thread_diameter0.138 INCHES IN
minimum_tensile_strength140000 POUNDS PER SQUARE INCH LBS
NSN5305-01-340-5065
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: DEJ7900-6-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL ACCOMMODATED THICKNESS: 0.145 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: PAN NO. 2
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
FASTENER LENGTH0.594 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL ACCOMMODATED THICKNESS0.145 INCHES MINIMUM AND 0.155 INCHES MAXIMUM IN
THREAD LENGTH0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5732 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
FT1015-06-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
4020263-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DEJ7900-6-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DEJ7900-6-3?
DEJ7900-6-3 is a SCREW ASSEMBLY,PANEL.
What parts can replace DEJ7900-6-3?
There are 2 known substitutes for DEJ7900-6-3: FT1015-06-4, 4020263-1. Substitute compatibility should be verified for your specific system.
What is the NSN for DEJ7900-6-3?
DEJ7900-6-3 is cataloged in the U.S. Government catalog under NSN 5305-01-340-5065. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DEJ7900-6-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.