PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DE27485PCCG
DE27485PCCG ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL, outside_diameter: 1.250 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.950 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-254-9952, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DE27485PCCG
NSN: 5330-00-254-9952
FSC: 5330
CAGE: 53618 — OCEANOGRAPHIC BATTERY CO INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
outside_diameter1.250 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.950 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-P-15817B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-254-9952
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DE27485PCCG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 0.950 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-15817B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER0.950 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-15817B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER1.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
39718Interchangeable
interchangeable cross-reference
interchangeable
4001-39710Interchangeable
interchangeable cross-reference
interchangeable
4001-39710 ITEM 8Interchangeable
interchangeable cross-reference
interchangeable
33660Interchangeable
interchangeable cross-reference
interchangeable
39218Interchangeable
interchangeable cross-reference
interchangeable
90061-6204-965433PC23Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DE27485PCCG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DE27485PCCG?
DE27485PCCG is a GASKET.
What parts can replace DE27485PCCG?
There are 14 known substitutes for DE27485PCCG: 39718, 4001-39710, 4001-39710 ITEM 8 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DE27485PCCG?
DE27485PCCG is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-254-9952. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DE27485PCCG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026