PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DE17-23
DE17-23 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TOOL KIT,REGULATOR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, special_features: SETS UP AND REGULATES SUPER-LITE-17, SUPER-LITE-27 HELMET, KMB-18 AND KMB-28 BAND MASK, housing_bore_diameter: 10.500 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-7764, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DE17-23
NSN: 5330-00-154-7764
FSC: 5330
CAGE: 79292 — SCHINDLER ELEVATOR CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.625 INCHES NOMINAL IN
special_featuresSETS UP AND REGULATES SUPER-LITE-17, SUPER-LITE-27 HELMET, KMB-18 AND KMB-28 BAND MASK
housing_bore_diameter10.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter9.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-154-7764
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DE17-23 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
ACCOMMODATED SHAFT DIAMETER: 9.500 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 10.500 INCHES NOMINAL IN
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER9.500 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
CASE STYLESQUARE
HOUSING BORE DIAMETER10.500 INCHES NOMINAL IN
SEAL WIDTH0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
0-0569-4-8Interchangeable
interchangeable cross-reference
interchangeable
116872-001Interchangeable
interchangeable cross-reference
interchangeable
0360-0017Interchangeable
interchangeable cross-reference
interchangeable
TL465UInterchangeable
interchangeable cross-reference
interchangeable
54614Interchangeable
interchangeable cross-reference
interchangeable
3638Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DE17-23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DE17-23?
DE17-23 is a TOOL KIT,REGULATOR.
What parts can replace DE17-23?
There are 22 known substitutes for DE17-23: 0-0569-4-8, 116872-001, 0360-0017 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DE17-23?
DE17-23 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-154-7764. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DE17-23

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026