PartsTable
Technical Data Sheet
DE10527 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN, housing_bore_diameter: 1.624 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-6396, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DE10527
NSN: 5330-00-291-6396
FSC: 5330
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
housing_bore_diameter1.624 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.750 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-291-6396
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DE10527 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
CASE STYLE: SQUARE
ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
SEALING ELEMENT STYLE: ANGULAR
HOUSING BORE DIAMETER: 1.624 INCHES NOMINAL IN
SEAL WIDTH: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.624 INCHES NOMINAL IN
SEAL WIDTH0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
16-2-24Interchangeable
interchangeable cross-reference
interchangeable
B16-2-24Interchangeable
interchangeable cross-reference
interchangeable
601Interchangeable
interchangeable cross-reference
interchangeable
160-40Interchangeable
interchangeable cross-reference
interchangeable
M6000-N-01000Interchangeable
interchangeable cross-reference
interchangeable
WW-C-581Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DE10527?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DE10527?
DE10527 is a SEAL,PLAIN ENCASED.
What parts can replace DE10527?
There are 17 known substitutes for DE10527: 16-2-24, B16-2-24, 601 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DE10527?
DE10527 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-6396. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DE10527