PartsTable
Technical Data Sheet
Download PDF

DDW400512 — WASHER,SEAL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

DDW400512: WASHER,SEAL.

The WASHER,SEAL is a the manufacturer industrial component. Key specifications include special_features: THREAD SIZE .375 BSP, shoulder_thickness: 1.05 MILLIMETERS MINIMUM AND 1.35 MILLIMETERS MAXIMUM MM, closed_inside_diameter: 17.15 MILLIMETERS MINIMUM AND 17.55 MILLIMETERS MAXIMUM MM, closed_outside_diameter: 22.5 MILLIMETERS MINIMUM AND 22.9 MILLIMETERS MAXIMUM MM, end_item_identification: TEST STANT,, part_name_assigned_by_controlling_agency: BONDED SEALS. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-725-1423, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DDW400512
NSN: 5310-01-725-1423
FSC: 5310 — Nuts and Washers
CAGE: 09257 — TRELLEBORG SEALING SOLUTIONS US, INC. (USA)
SPECIFICATIONS
special_featuresTHREAD SIZE .375 BSP
shoulder_thickness1.05 MILLIMETERS MINIMUM AND 1.35 MILLIMETERS MAXIMUM MM
closed_inside_diameter17.15 MILLIMETERS MINIMUM AND 17.55 MILLIMETERS MAXIMUM MM
closed_outside_diameter22.5 MILLIMETERS MINIMUM AND 22.9 MILLIMETERS MAXIMUM MM
end_item_identificationTEST STANT,
part_name_assigned_by_controlling_agencyBONDED SEALS
NSN5310-01-725-1423
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DDW400512 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER THICKNESS: 1.05 MILLIMETERS MINIMUM AND 1.35 MILLIMETERS MAXIMUM MM
•
CLOSED OUTSIDE DIAMETER: 22.5 MILLIMETERS MINIMUM AND 22.9 MILLIMETERS MAXIMUM MM
•
CLOSED INSIDE DIAMETER: 17.15 MILLIMETERS MINIMUM AND 17.55 MILLIMETERS MAXIMUM MM
TECHNICAL CHARACTERISTICS
SHOULDER THICKNESS1.05 MILLIMETERS MINIMUM AND 1.35 MILLIMETERS MAXIMUM MM
CLOSED OUTSIDE DIAMETER22.5 MILLIMETERS MINIMUM AND 22.9 MILLIMETERS MAXIMUM MM
SPECIAL FEATURESTHREAD SIZE .375 BSP
PART NAME ASSIGNED BY CONTROLLING AGENCYBONDED SEALS
END ITEM IDENTIFICATIONTEST STANT,
CLOSED INSIDE DIAMETER17.15 MILLIMETERS MINIMUM AND 17.55 MILLIMETERS MAXIMUM MM
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DDW400512?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DDW400512?
DDW400512 is a WASHER,SEAL.
What is the NSN for DDW400512?
DDW400512 is cataloged in the U.S. Government catalog under NSN 5310-01-725-1423. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DDW400512