PartsTable
Technical Data Sheet
Download PDF

DDM000167 — WASHER,SEAL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

DDM000167: WASHER,SEAL.

The WASHER,SEAL is a the manufacturer industrial component. Key specifications include special_features: THREAD SIZE M16, shoulder_thickness: 1.4 MILLIMETERS MINIMUM AND 1.6 MILLIMETERS MAXIMUM MM, closed_inside_diameter: 16.55 MILLIMETERS MINIMUM AND 16.85 MILLIMETERS MAXIMUM MM, closed_outside_diameter: 23.85 MILLIMETERS MINIMUM AND 24.15 MILLIMETERS MAXIMUM MM, end_item_identification: TEST STANT,, part_name_assigned_by_controlling_agency: STATIC SEALS-BONDED SEALS. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-725-1418, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DDM000167
NSN: 5310-01-725-1418
FSC: 5310 — Nuts and Washers
CAGE: 09257 — TRELLEBORG SEALING SOLUTIONS US, INC. (USA)
SPECIFICATIONS
special_featuresTHREAD SIZE M16
shoulder_thickness1.4 MILLIMETERS MINIMUM AND 1.6 MILLIMETERS MAXIMUM MM
closed_inside_diameter16.55 MILLIMETERS MINIMUM AND 16.85 MILLIMETERS MAXIMUM MM
closed_outside_diameter23.85 MILLIMETERS MINIMUM AND 24.15 MILLIMETERS MAXIMUM MM
end_item_identificationTEST STANT,
part_name_assigned_by_controlling_agencySTATIC SEALS-BONDED SEALS
NSN5310-01-725-1418
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DDM000167 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER THICKNESS: 1.4 MILLIMETERS MINIMUM AND 1.6 MILLIMETERS MAXIMUM MM
•
CLOSED OUTSIDE DIAMETER: 23.85 MILLIMETERS MINIMUM AND 24.15 MILLIMETERS MAXIMUM MM
•
CLOSED INSIDE DIAMETER: 16.55 MILLIMETERS MINIMUM AND 16.85 MILLIMETERS MAXIMUM MM
TECHNICAL CHARACTERISTICS
SHOULDER THICKNESS1.4 MILLIMETERS MINIMUM AND 1.6 MILLIMETERS MAXIMUM MM
CLOSED OUTSIDE DIAMETER23.85 MILLIMETERS MINIMUM AND 24.15 MILLIMETERS MAXIMUM MM
SPECIAL FEATURESTHREAD SIZE M16
PART NAME ASSIGNED BY CONTROLLING AGENCYSTATIC SEALS-BONDED SEALS
END ITEM IDENTIFICATIONTEST STANT,
CLOSED INSIDE DIAMETER16.55 MILLIMETERS MINIMUM AND 16.85 MILLIMETERS MAXIMUM MM
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DDM000167?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DDM000167?
DDM000167 is a WASHER,SEAL.
What is the NSN for DDM000167?
DDM000167 is cataloged in the U.S. Government catalog under NSN 5310-01-725-1418. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DDM000167