DD445-S4700-373 — COLLAR,SHAFT

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

DD445-S4700-373: COLLAR,SHAFT.

The COLLAR,SHAFT is a the manufacturer industrial component. Key specifications include material: STEEL, thickness: 0.312 INCHES NOMINAL IN, bore_diameter: 1.1820 INCHES MINIMUM AND 1.1830 INCHES MAXIMUM IN, outside_diameter: 1.750 INCHES NOMINAL IN, special_features: 1/16 BY 45 DEG CHAMFER IDBORE OPPOSITE THE OD CHAMGER, style_designator: ROUND W/SINGLE CHAMFER. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-393-3517, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

DD445-S4700-373

NSN: 5310-00-393-3517
NIINs: 003933517, 005403786
FSC: 5310 — Nuts and Washers
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)

SPECIFICATIONS

material	STEEL
thickness	0.312 INCHES NOMINAL IN
bore_diameter	1.1820 INCHES MINIMUM AND 1.1830 INCHES MAXIMUM IN
outside_diameter	1.750 INCHES NOMINAL IN
special_features	1/16 BY 45 DEG CHAMFER IDBORE OPPOSITE THE OD CHAMGER
style_designator	ROUND W/SINGLE CHAMFER
chamfer_angle_in_deg	45.0
largest_diameter_length	0.188 INCHES NOMINAL IN
material_document_and_classification	MIL-S-890, CLASS B MIL SPEC SINGLE MATERIAL RESPONSE
NSN	5310-00-393-3517

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL MIL-S-890; 1.500 IN. OD; 1.500 IN. LG; THREADED INTERNAL ONE END 1.125-12 RH 0.750 IN. THD LG; OTHER END 1.031 IN. ID; 2 HOLES 0.250 IN. DIA 180 DEG APART 0.250 IN. FROM UNTHREADED END; 1 HOLE THREADED 0.250 IN. 90 DEG FROM UNTHREADED HOLES IN

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION

STEEL MIL-S-890; 1.500 IN. OD; 1.500 IN. LG; THREADED INTERNAL ONE END 1.125-12 RH 0.750 IN. THD LG; OTHER END 1.031 IN. ID; 2 HOLES 0.250 IN. DIA 180 DEG APART 0.250 IN. FROM UNTHREADED END; 1 HOLE THREADED 0.250 IN. 90 DEG FROM UNTHREADED HOLES IN

SUBSTITUTES & CROSS-REFERENCES 6

SK-139844Reference document

Same NSN cross-reference

Reference document — Secondary reference

SL5058PC39Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

11028PReference document

Same NSN cross-reference

Reference document — Design control — primary reference

SL5056PC39Reference document

Same NSN cross-reference

Reference document — Secondary reference

SL8165PC15Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

255058-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy DD445-S4700-373?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is DD445-S4700-373?

DD445-S4700-373 is a COLLAR,SHAFT.

What parts can replace DD445-S4700-373?

There are 6 known substitutes for DD445-S4700-373: SK-139844, SL5058PC39, 11028P and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for DD445-S4700-373?

DD445-S4700-373 is cataloged in the U.S. Government catalog under NSN 5310-00-393-3517. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

DD445-S4700-373 — COLLAR,SHAFT

Request a Quote — DD445-S4700-373