DD-4618 REF NO 16 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

DD-4618 REF NO 16: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.663 INCHES MINIMUM AND 3.723 INCHES MAXIMUM IN, center_hole_diameter: 3.463 INCHES MINIMUM AND 3.511 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-167-5139, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

DD-4618 REF NO 16

NSN: 5331-00-167-5139
FSC: 5331 — O-ring
CAGE: 53423 — AUTOMATION D S S INC SUB OF RYAN TECHNOLOGY CORP (USA)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	3.663 INCHES MINIMUM AND 3.723 INCHES MAXIMUM IN
center_hole_diameter	3.463 INCHES MINIMUM AND 3.511 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-00-167-5139

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 3.663 INCHES MINIMUM AND 3.723 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 3.463 INCHES MINIMUM AND 3.511 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	3.663 INCHES MINIMUM AND 3.723 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	3.463 INCHES MINIMUM AND 3.511 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 8

5331PL1674508Reference document

Same NSN cross-reference

Reference document — Informative reference only

AS3209-153Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS9388-153Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

ST1050-153Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LE121T SHT5, 820300-7 FN-10Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2-153Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy DD-4618 REF NO 16?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is DD-4618 REF NO 16?

DD-4618 REF NO 16 is a O-RING.

What parts can replace DD-4618 REF NO 16?

There are 8 known substitutes for DD-4618 REF NO 16: 5331PL1674508, AS3209-153, MS9388-153 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for DD-4618 REF NO 16?

DD-4618 REF NO 16 is cataloged in the U.S. Government catalog under NSN 5331-00-167-5139. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

DD-4618 REF NO 16 — O-RING

Request a Quote — DD-4618 REF NO 16