USP - Ultra compact and extra protected by using 12 fibers in a 6.5mm trunk cable and one MTP connector at each end, so very suitable for datacenters - ACT MTP/MPO cables use MTP US Conec connectors for among other benefits a very low loss and better mechanical properties - Designed to be used with QSFP transceivers or as backbone cabling - The OM4 fibers in these cables are backwards compatible with OM3 fibers This part is cataloged in the U.S. Government catalog under NSN 5305-00-352-9406, indicating validated use in U.S. government and defense logistics supply chains.
WHERE IT FITS
DC5004
NSN:5305-00-352-9406 FSC:5305 — Screws CAGE:35311 — AMERICAN STANDARD INC WESTINGHOUSE AIR BRAKE CO DIV (USA)
SPECIFICATIONS
head_style
ROUND
head_height
0.139 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
thread_class
2A A
head_diameter
0.382 INCHES MINIMUM AND 0.408 INCHES MAXIMUM IN
thread_length
0.500 INCHES MAXIMUM IN
screw_material
STEEL COMP 304
fastener_length
0.500 INCHES NOMINAL IN
hardness_rating
80.0 ROCKWELL B NOMINAL
thread_direction
RIGHT-HAND
internal_drive_style
CROSS RECESS TYPE 1
nominal_thread_diameter
0.216 INCHES IN
minimum_tensile_strength
40000 POUNDS PER SQUARE INCH LBS
NSN
5305-00-352-9406
COMPONENT DIAGRAM
KEY FEATURES
•
HEAD HEIGHT: 0.139 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.500 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 ROCKWELL B NOMINAL
•
NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
HEAD STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT
0.139 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
FASTENER LENGTH
0.500 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION
AISI ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH
0.500 INCHES MAXIMUM IN
HARDNESS RATING
80.0 ROCKWELL B NOMINAL
NOMINAL THREAD DIAMETER
0.216 INCHES IN
HEAD STYLE
ROUND
THREAD DIRECTION
RIGHT-HAND
SCREW MATERIAL
STEEL COMP 304
MINIMUM TENSILE STRENGTH
40000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DC5004?
DC5004 is a SCREW,MACHINE manufactured by ACT.
What is the NSN for DC5004?
DC5004 is cataloged in the U.S. Government catalog under NSN 5305-00-352-9406. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.