PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DAS7-32BQ
DAS7-32BQ ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_diameter: 0.4370 INCHES NOMINAL IN, inner_ring_width: 1.5625 INCHES NOMINAL IN, outer_ring_width: 1.0000 INCHES NOMINAL IN, style_designator: CONCAVE ROLLERS, DOUBLE CLOSURE, SELF ALIGNING, bearing_seal_type: CONTACT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-143-3023, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DAS7-32BQ
NSN: 3110-00-143-3023
FSC: 3110
CAGE: 77896 — REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_diameter0.4370 INCHES NOMINAL IN
seal_quantity2
inner_ring_width1.5625 INCHES NOMINAL IN
outer_ring_width1.0000 INCHES NOMINAL IN
special_features10 DEG SELF ALIGNMENT IN EITHER DIRECTION,LUBRICANT HOLE AND GROOVE IN OUTER RING,HEAT TREATED SLEEVE AND COLLARS ON INNER RING
style_designatorCONCAVE ROLLERS, DOUBLE CLOSURE, SELF ALIGNING
bearing_seal_typeCONTACT
surface_treatmentCADMIUM EXPOSED SURFACES AS MOUNTED
lubrication_materialGREASE
overall_outside_diameter2.0000 INCHES NOMINAL IN
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-143-3023
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: DAS7-32BQ · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
OVERALL OUTSIDE DIAMETER: 2.0000 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
SEAL QUANTITY: 2
•
INNER RING WIDTH: 1.5625 INCHES NOMINAL IN
•
OUTER RING WIDTH: 1.0000 INCHES NOMINAL IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
BEARING SEAL TYPECONTACT
OVERALL OUTSIDE DIAMETER2.0000 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
SEAL QUANTITY2
INNER RING WIDTH1.5625 INCHES NOMINAL IN
SPECIAL FEATURES10 DEG SELF ALIGNMENT IN EITHER DIRECTION,LUBRICANT HOLE AND GROOVE IN OUTER RING,HEAT TREATED SLEEVE AND COLLARS ON INNER RING
OUTER RING WIDTH1.0000 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
BORE DIAMETER0.4370 INCHES NOMINAL IN
MATERIALSTEEL LOCKING COLLAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
AB-7BRASS3-4Interchangeable
interchangeable cross-reference
interchangeable
AB-7Interchangeable
interchangeable cross-reference
interchangeable
WWC633-14-BInterchangeable
interchangeable cross-reference
interchangeable
AB7ANG25Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DAS7-32BQ?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DAS7-32BQ?
DAS7-32BQ is a BEARING,ROLLER,AIRFRAME.
What parts can replace DAS7-32BQ?
There are 4 known substitutes for DAS7-32BQ: AB-7BRASS3-4, AB-7, WWC633-14-B and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DAS7-32BQ?
DAS7-32BQ is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-143-3023. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DAS7-32BQ

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026