PartsTable
Technical Data Sheet
Download PDF

DAL10-26A41 — BEARING,ROLLER,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

DAL10-26A41: BEARING,ROLLER,ROD END.

The BEARING,ROLLER,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4620 ROD END BODY, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, alignment_type: RIGID, overall_length: 5.4950 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-188-2554, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DAL10-26A41
NSN: 3110-01-188-2554
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77896 — REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4620 ROD END BODY
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
alignment_typeRIGID
overall_length5.4950 INCHES NOMINAL IN
shank_diameter1.6870 INCHES NOMINAL IN
inner_ring_width0.7700 INCHES MINIMUM AND 0.7750 INCHES MAXIMUM IN
outer_ring_width0.6400 INCHES MINIMUM AND 0.6450 INCHES MAXIMUM IN
style_designatorDOUBLE ROW, CONCAVE ROLLERS
thread_directionRIGHT-HAND
nominal_thread_size0.750 INCHES IN
NSN3110-01-188-2554
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: DAL10-26A41 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.6870 INCHES NOMINAL IN
•
SHANK THREAD LENGTH: 2.0300 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.6400 INCHES MINIMUM AND 0.6450 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: DOUBLE ROW, CONCAVE ROLLERS
•
OVERALL OUTSIDE DIAMETER: 2.6300 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.6870 INCHES NOMINAL IN
SHANK THREAD LENGTH2.0300 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.6400 INCHES MINIMUM AND 0.6450 INCHES MAXIMUM IN
STYLE DESIGNATORDOUBLE ROW, CONCAVE ROLLERS
OVERALL LENGTH5.4950 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.6300 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
SELF-ALIGNMENT ANGLE16.00 DEGREES NOMINAL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
00366-100-41Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DAL10-26A41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DAL10-26A41?
DAL10-26A41 is a BEARING,ROLLER,ROD END.
What parts can replace DAL10-26A41?
There is 1 known substitute for DAL10-26A41: 00366-100-41. Substitute compatibility should be verified for your specific system.
What is the NSN for DAL10-26A41?
DAL10-26A41 is cataloged in the U.S. Government catalog under NSN 3110-01-188-2554. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DAL10-26A41