PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DAAH10
DAAH10 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 10.7 MILLIMETERS NOMINAL MM, hardness_rating: 44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM, outside_diameter: 18.1 MILLIMETERS NOMINAL MM, special_features: WASHER FITS SIZE M10 SCREW, style_designator: SPLIT HELICAL-RIGHT HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-608-4911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DAAH10
NSN: 5310-01-608-4911
FSC: 5310
CAGE: 0HVA8 — SUPERIOR FASTENER CO., INC. DBA SUPERIOR INDUSTRIAL SUPPLY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter10.7 MILLIMETERS NOMINAL MM
hardness_rating44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
outside_diameter18.1 MILLIMETERS NOMINAL MM
special_featuresWASHER FITS SIZE M10 SCREW
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentZINC OVERALL
material_thickness2.05 MILLIMETERS NOMINAL MM
end_item_identification5410-01-592-9463; MRAP - COUGAR SABR/TOW; MRAP BUFFALO MK2A2
part_name_assigned_by_controlling_agencyWASHER, LOCK
NSN5310-01-608-4911
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DAAH10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 10.7 MILLIMETERS NOMINAL MM
•
OUTSIDE DIAMETER: 18.1 MILLIMETERS NOMINAL MM
•
HARDNESS RATING: 44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
•
MATERIAL THICKNESS: 2.05 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER10.7 MILLIMETERS NOMINAL MM
SPECIAL FEATURESWASHER FITS SIZE M10 SCREW
OUTSIDE DIAMETER18.1 MILLIMETERS NOMINAL MM
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER, LOCK
HARDNESS RATING44.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
END ITEM IDENTIFICATION5410-01-592-9463; MRAP - COUGAR SABR/TOW; MRAP BUFFALO MK2A2
MATERIAL THICKNESS2.05 MILLIMETERS NOMINAL MM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
17KP501Interchangeable
interchangeable cross-reference
interchangeable
L140127Interchangeable
interchangeable cross-reference
interchangeable
03333-08Interchangeable
interchangeable cross-reference
interchangeable
17-3-3671-3Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DAAH10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DAAH10?
DAAH10 is a WASHER,LOCK.
What parts can replace DAAH10?
There are 4 known substitutes for DAAH10: 17KP501, L140127, 03333-08 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DAAH10?
DAAH10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-608-4911. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DAAH10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026