PartsTable
Technical Data Sheet
Download PDF

DAA3150D309-012 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

DAA3150D309-012: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include construction: ONE-PIECE, end_cut_angle: 52.0 DEGREES, overall_length: 6.940 INCHES NOMINAL IN, special_features: LOW OBSERVABLE CRITICAL ITEM/PROCESS, style_designator: STRIP, end_item_identification: B-2 TSSP. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-348-7056, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DAA3150D309-012
NSN: 5330-01-348-7056
FSC: 5330 — Packing and Gasket Materials
CAGE: 1W025 — NORTHROP GRUMMAN SYSTEMS CORP DBA NORTHROP GRUMMAN COMPUTING SYSTEMS (USA)
SPECIFICATIONS
constructionONE-PIECE
end_cut_angle52.0 DEGREES
overall_length6.940 INCHES NOMINAL IN
special_featuresLOW OBSERVABLE CRITICAL ITEM/PROCESS
style_designatorSTRIP
end_item_identificationB-2 TSSP
cross-sectional_shape_styleSPECIAL
criticality_code_justificationFEAT
part_name_assigned_by_controlling_agencySEAL, AERODYNAMIC
NSN5330-01-348-7056
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DAA3150D309-012 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
STYLE DESIGNATOR: STRIP
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
END CUT ANGLE: 52.0 DEGREES
TECHNICAL CHARACTERISTICS
CRITICALITY CODE JUSTIFICATIONFEAT
STYLE DESIGNATORSTRIP
OVERALL LENGTH6.940 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
END CUT ANGLE52.0 DEGREES
SPECIAL FEATURESLOW OBSERVABLE CRITICAL ITEM/PROCESS
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL, AERODYNAMIC
END ITEM IDENTIFICATIONB-2 TSSP
CONSTRUCTIONONE-PIECE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DAA3150D309-012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DAA3150D309-012?
DAA3150D309-012 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What is the NSN for DAA3150D309-012?
DAA3150D309-012 is cataloged in the U.S. Government catalog under NSN 5330-01-348-7056. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DAA3150D309-012