PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DAA3122P012-101
DAA3122P012-101 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, overall_length: 29.320 INCHES NOMINAL29.320 INCHES NOMINAL IN, cross-sectional_height: 0.710 INCHES MINIMUM AND 0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM0.750 INCHES MAXIMUM IN, material_document_and_classification: ZZ-R-765,CL 3B FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-351-7132, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DAA3122P012-101
NSN: 5330-01-351-7132
FSC: 5330
CAGE: 80378 — TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT INTEGRATED PROGRAMS DIVISION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
overall_length29.320 INCHES NOMINAL29.320 INCHES NOMINAL IN
cross-sectional_height0.710 INCHES MINIMUM AND 0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM0.750 INCHES MAXIMUM IN
material_document_and_classificationZZ-R-765,CL 3B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-351-7132
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DAA3122P012-101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.710 INCHES MINIMUM AND 0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM0.750 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765,CL 3B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.710 INCHES MINIMUM AND 0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM0.750 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONZZ-R-765,CL 3B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER SILICONE CLASS Q OVERALL
OVERALL LENGTH29.320 INCHES NOMINAL29.320 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
A908PC150Interchangeable
interchangeable cross-reference
interchangeable
8839Interchangeable
interchangeable cross-reference
interchangeable
4-5175Interchangeable
interchangeable cross-reference
interchangeable
640U-2C-240AInterchangeable
interchangeable cross-reference
interchangeable
500GInterchangeable
interchangeable cross-reference
interchangeable
8839MOTORInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DAA3122P012-101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DAA3122P012-101?
DAA3122P012-101 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace DAA3122P012-101?
There are 9 known substitutes for DAA3122P012-101: A908PC150, 8839, 4-5175 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DAA3122P012-101?
DAA3122P012-101 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-351-7132. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DAA3122P012-101

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026