The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, outside_diameter: 7.394 INCHES NOMINAL IN, surface_treatment: ANODIZE OVERALL, bolt_circle_diameter: 6.210 INCHES MINIMUM AND 6.230 INCHES MAXIMUM IN, cross-sectional_thickness: 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN, specification/standard_data: 96906-MIL-R-25988, TYPE II, GRADE 70, CLASS 1 GOVERNMENT STANDARD. This part is cataloged in the U.S.
Government catalog under NSN 5330-01-217-0563, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
DA9948-1
NSN:5330-01-217-0563 FSC:5330 — Packing and Gasket Materials CAGE:95272 — STILLMAN SEAL CORPORATION DIV STILLMAN SEAL CORPERATION (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY OVERALL
outside_diameter
7.394 INCHES NOMINAL IN
special_features
MATL: RETAINER, PER AMS 4027 ANODIZED PER MIL-A-8625 TYPE II (NON-DYED); ANODIC COATING ALTERNATE PROCESS COMPLETION PERMITTED ON UP TO 5% OF ANY FEATURE PER MIL-C-5541 CL-A (CHEMICAL FILM)
surface_treatment
ANODIZE OVERALL
bolt_circle_diameter
6.210 INCHES MINIMUM AND 6.230 INCHES MAXIMUM IN
cross-sectional_thickness
0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
specification/standard_data
96906-MIL-R-25988, TYPE II, GRADE 70, CLASS 1 GOVERNMENT STANDARD
material_document_and_classification
AMS4027 ASSN STD ALL MATERIAL RESPONSES OVERALL
part_name_assigned_by_controlling_agency
GASKET,SEAL-MAIN ENGINE CONTROL
NSN
5330-01-217-0563
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4027 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 7.394 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 96906-MIL-R-25988, TYPE II, GRADE 70, CLASS 1 GOVERNMENT STANDARD
•
BOLT CIRCLE DIAMETER: 6.210 INCHES MINIMUM AND 6.230 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS
0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
AMS4027 ASSN STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER
7.394 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA
96906-MIL-R-25988, TYPE II, GRADE 70, CLASS 1 GOVERNMENT STANDARD
BOLT CIRCLE DIAMETER
6.210 INCHES MINIMUM AND 6.230 INCHES MAXIMUM IN
SPECIAL FEATURES
MATL: RETAINER, PER AMS 4027 ANODIZED PER MIL-A-8625 TYPE II (NON-DYED); ANODIC COATING ALTERNATE PROCESS COMPLETION PERMITTED ON UP TO 5% OF ANY FEATURE PER MIL-C-5541 CL-A (CHEMICAL FILM)
SURFACE TREATMENT
ANODIZE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY
GASKET,SEAL-MAIN ENGINE CONTROL
MATERIAL
ALUMINUM ALLOY OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DA9948-1?
DA9948-1 is a GASKET.
What parts can replace DA9948-1?
There is 1 known substitute for DA9948-1: 1266M95P04. Substitute compatibility should be verified for your specific system.
What is the NSN for DA9948-1?
DA9948-1 is cataloged in the U.S. Government catalog under NSN 5330-01-217-0563. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.