PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DA22
DA22 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WRENCH,OPEN END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1008 OVERALL, thickness: 0.065 INCHES NOMINAL IN, hole_diameter: 0.251 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN, overall_length: 6.375 INCHES MINIMUM IN, overall_diameter: 0.812 INCHES NOMINAL IN, special_features: FORGED STEEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-262-4482, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DA22
NSN: 5310-00-262-4482
FSC: 5310
CAGE: 68505 — PRESTOLITE ELECTRIC INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1008 OVERALL
thickness0.065 INCHES NOMINAL IN
hole_diameter0.251 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN
overall_length6.375 INCHES MINIMUM IN
overall_diameter0.812 INCHES NOMINAL IN
special_featuresFORGED STEEL
style_designatorDOUBLE HEAD
surface_treatmentCHROMIUM OVERALL
large_end_head_angle60.0 DEGREES NOMINAL
small_end_head_angle15.0 DEGREES NOMINAL
peripheral_shape_styleROUND
wrenching_surface_size0.688 INCHES NOMINAL BOTH ENDS IN
NSN5310-00-262-4482
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: DA22 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1008 OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CENTER HOLE SHAPE STYLE: ROUND
•
PERIPHERAL SHAPE STYLE: ROUND
•
THICKNESS: 0.065 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.251 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OVERALL DIAMETER: 0.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1008 OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CENTER HOLE SHAPE STYLEROUND
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.065 INCHES NOMINAL IN
HOLE DIAMETER0.251 INCHES MINIMUM AND 0.257 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL DIAMETER0.812 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
B107.39 TY2CL1Interchangeable
interchangeable cross-reference
interchangeable
DA22Interchangeable
interchangeable cross-reference
interchangeable
B107.100Interchangeable
interchangeable cross-reference
interchangeable
BP12110Interchangeable
interchangeable cross-reference
interchangeable
SIB-987Interchangeable
interchangeable cross-reference
interchangeable
A-1621Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy DA22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DA22?
DA22 is a WRENCH,OPEN END.
What parts can replace DA22?
There are 10 known substitutes for DA22: B107.39 TY2CL1, DA22, B107.100 and 7 more. Substitute compatibility should be verified for your specific system.
Is DA22 still available?
DA22 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DA22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026