PartsTable
Technical Data Sheet
Download PDF

D93628 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D93628: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.303 INCHES NOMINAL IN, overall_length: 6.063 INCHES NOMINAL IN, special_features: THREE BOLT HOLES 0.281 IN. DIA IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-374-9393, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D93628
NSN: 5330-00-374-9393
FSC: 5330 — Packing and Gasket Materials
CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.303 INCHES NOMINAL IN
overall_length6.063 INCHES NOMINAL IN
special_featuresTHREE BOLT HOLES 0.281 IN. DIA IN
bolt_hole_quantity4
cross-sectional_thickness0.031 INCHES NOMINAL IN
NSN5330-00-374-9393
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D93628 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OVERALL LENGTH6.063 INCHES NOMINAL IN
OVERALL WIDTH5.303 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
SPECIAL FEATURESTHREE BOLT HOLES 0.281 IN. DIA IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 3
V7069Reference document
Same NSN cross-reference
Reference document — Secondary reference
69674R1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
93628Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D93628?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D93628?
D93628 is a GASKET.
What parts can replace D93628?
There are 3 known substitutes for D93628: V7069, 69674R1, 93628. Substitute compatibility should be verified for your specific system.
What is the NSN for D93628?
D93628 is cataloged in the U.S. Government catalog under NSN 5330-00-374-9393. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D93628

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.