PartsTable
Technical Data Sheet
Download PDF

D844-1032-70G — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D844-1032-70G: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, outside_diameter: 4.250 INCHES NOMINAL IN, special_features: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D, aperture_diameter: 4.000 INCHES NOMINAL IN, cross-sectional_thickness: 0.094 INCHES NOMINAL IN, criticality_code_justification: FEAT. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-463-4723, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D844-1032-70G
NSN: 5330-01-463-4723
FSC: 5330 — Packing and Gasket Materials
CAGE: 6UY05 — COLD LLC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
outside_diameter4.250 INCHES NOMINAL IN
special_featuresCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
aperture_diameter4.000 INCHES NOMINAL IN
cross-sectional_thickness0.094 INCHES NOMINAL IN
criticality_code_justificationFEAT
NSN5330-01-463-4723
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D844-1032-70G MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.094 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
OUTSIDE DIAMETER: 4.250 INCHES NOMINAL IN
•
APERTURE DIAMETER: 4.000 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.094 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONFEAT
OUTSIDE DIAMETER4.250 INCHES NOMINAL IN
APERTURE DIAMETER4.000 INCHES NOMINAL IN
SPECIAL FEATURESCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
D844-1032-70GCPReference document
Same NSN cross-reference
Reference document — Secondary reference
D954-1032 P/N D844-1032-70GReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy D844-1032-70G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D844-1032-70G?
D844-1032-70G is a GASKET.
What parts can replace D844-1032-70G?
There are 2 known substitutes for D844-1032-70G: D844-1032-70GCP, D954-1032 P/N D844-1032-70G. Substitute compatibility should be verified for your specific system.
What is the NSN for D844-1032-70G?
D844-1032-70G is cataloged in the U.S. Government catalog under NSN 5330-01-463-4723. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D844-1032-70G

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.