PartsTable
Technical Data Sheet
Download PDF

D792685C8N10 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

D792685C8N10: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 303SE OVERALL, shank_length: 1.293 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.625 INCHES NOMINAL IN, overall_length: 2.563 INCHES NOMINAL IN, shank_diameter: 0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-306-4940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D792685C8N10
NSN: 5315-01-306-4940
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 97928 — HUCK INTL INC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 303SE OVERALL
shank_length1.293 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN
thread_class3A A
thread_length0.625 INCHES NOMINAL IN
overall_length2.563 INCHES NOMINAL IN
shank_diameter0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM IN
first_end_styleCHAMFERED
second_end_styleCHAMFERED
special_featuresROLLED RADIUS 0.040 IN. MIN. 0.050 IN. MAX. ON BOTH SHANKS ADJACENT TO SHOULDER IN
style_designatorSHOULDER
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
NSN5315-01-306-4940
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D792685C8N10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM IN
•
SECOND SHANK DIAMETER: 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.053 INCHES NOMINAL IN
•
FIRST END LOCATION: UNTHREADED END
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.625 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 1.293 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM IN
SECOND SHANK DIAMETER0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.053 INCHES NOMINAL IN
FIRST END LOCATIONUNTHREADED END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.625 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH1.293 INCHES MINIMUM AND 1.333 INCHES MAXIMUM IN
STYLE DESIGNATORSHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND B FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763,COND B FED SPEC 2ND MATERIAL RESPONSE OR MCA1R MMS265 CAGEC 76301 MFR REF 3RD MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 4
VS3258C7-8-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3M943C7-8-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11415C7-8-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
AAP139C7-8-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy D792685C8N10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D792685C8N10?
D792685C8N10 is a PIN,SHOULDER,HEADLESS.
What parts can replace D792685C8N10?
There are 4 known substitutes for D792685C8N10: VS3258C7-8-10, 3M943C7-8-10, 11415C7-8-10 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D792685C8N10?
D792685C8N10 is cataloged in the U.S. Government catalog under NSN 5315-01-306-4940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D792685C8N10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.