PartsTable
Technical Data Sheet
Download PDF

D75A0007-1 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

D75A0007-1: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.531 INCHES NOMINAL IN, flat_height: 0.094 INCHES NOMINAL IN, shaft_style: ROUND, FLATTED, shaft_length: 0.730 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-145-2483, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ D75A0007-1
NSN: 5905-01-145-2483
NIINs: 011452483, 011902340
FSC: 5905 — Resistor
CAGE: 12464 — MCDONNELL DOUGLAS CORP MCDONNELL DOUGLAS ELECTRONIC SYSTEMS CO (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.531 INCHES NOMINAL IN
flat_height0.094 INCHES NOMINAL IN
shaft_styleROUND, FLATTED
shaft_length0.730 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter0.500 INCHES NOMINAL IN
shaft_diameter0.125 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
section_quantity1
first_flat_length0.230 INCHES NOMINAL IN
terminal_locationREAR END
NSN5905-01-145-2483
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN D75A0007-1 MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
BODY DIAMETER: 0.500 INCHES NOMINAL IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 5.000 KILOHMS SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.125 INCHES NOMINAL IN
•
BODY STYLE: CYLINDRICAL BUSHING MOUNTED
•
FIRST FLAT LENGTH: 0.230 INCHES NOMINAL IN
•
TERMINAL LOCATION: REAR END
TECHNICAL CHARACTERISTICS
BODY DIAMETER0.500 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION5.000 KILOHMS SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.125 INCHES NOMINAL IN
BODY STYLECYLINDRICAL BUSHING MOUNTED
FIRST FLAT LENGTH0.230 INCHES NOMINAL IN
TERMINAL LOCATIONREAR END
SHAFT STYLEROUND, FLATTED
ACTUATOR TYPESINGLE SHAFT
SUBSTITUTES & CROSS-REFERENCES 1
10127458Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation
Ready to buy D75A0007-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D75A0007-1?
D75A0007-1 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace D75A0007-1?
There is 1 known substitute for D75A0007-1: 10127458. Substitute compatibility should be verified for your specific system.
What is the NSN for D75A0007-1?
D75A0007-1 is cataloged in the U.S. Government catalog under NSN 5905-01-145-2483. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D75A0007-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.