D75310: SPRING,HELICAL,EXTENSION.
The SPRING,HELICAL,EXTENSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: MACHINED HALF LOOP BOTH ENDS, design_type: CLOSED, coil_quantity: 10-1/2, opening_width: 0.188 INCHES NOMINAL BOTH ENDS IN, inside_diameter: 0.481 INCHES MINIMUM AND 0.544 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5360-00-249-1724, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL OVERALL |
| end_style | MACHINED HALF LOOP BOTH ENDS |
| design_type | CLOSED |
| coil_quantity | 10-1/2 |
| opening_width | 0.188 INCHES NOMINAL BOTH ENDS IN |
| inside_diameter | 0.481 INCHES MINIMUM AND 0.544 INCHES MAXIMUM IN |
| style_designator | CYLINDRICAL |
| spring_free_length | 2.487 INCHES MINIMUM AND 2.550 INCHES MAXIMUM IN |
| coil_helix_direction | RIGHT-HAND OR LEFT-HAND |
| spring_deflection_rate | 150.880 POUNDS PER INCH MINIMUM AND 177.120 POUNDS PER INCH MAXIMUM LBS |
| spring_free_outside_diameter | 0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN |
| NSN | 5360-00-249-1724 |
| SPRING FREE OUTSIDE DIAMETER | 0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN |
| END STYLE | MACHINED HALF LOOP BOTH ENDS |
| DESIGN TYPE | CLOSED |
| STYLE DESIGNATOR | CYLINDRICAL |
| OPENING WIDTH | 0.188 INCHES NOMINAL BOTH ENDS IN |
| SPRING FREE LENGTH | 2.487 INCHES MINIMUM AND 2.550 INCHES MAXIMUM IN |
| SPRING DEFLECTION RATE | 150.880 POUNDS PER INCH MINIMUM AND 177.120 POUNDS PER INCH MAXIMUM LBS |
| INSIDE DIAMETER | 0.481 INCHES MINIMUM AND 0.544 INCHES MAXIMUM IN |
| COIL QUANTITY | 10-1/2 |
| COIL HELIX DIRECTION | RIGHT-HAND OR LEFT-HAND |