PartsTable / COMPONENT / D74197
D74197
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, end_radius: 0.375 INCHES NOMINAL IN, fork_depth: 0.563 INCHES NOMINAL IN, shank_length: 2.750 INCHES NOMINAL IN, overall_width: 0.438 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-535-7222, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
D74197
NSN: 5340-00-535-7222 FSC: 5340 CAGE: 23926 — KOMATSU AMERICA CORPORATION (USA)
SPECIFICATIONS
material NICKEL ALLOY OVERALL end_radius 0.375 INCHES NOMINAL IN fork_depth 0.563 INCHES NOMINAL IN shank_length 2.750 INCHES NOMINAL IN overall_width 0.438 INCHES NOMINAL IN overall_height 0.750 INCHES NOMINAL IN shank_diameter 0.500 INCHES NOMINAL IN fork_span_width 0.187 INCHES NOMINAL IN style_designator CLEVIS surface_treatment SILVER OVERALL fork_arm_thickness 0.125 INCHES NOMINAL IN distance_from_pivot_pinhole_center_to_rod_connection_end 3.313 INCHES NOMINAL IN NSN 5340-00-535-7222
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: D74197
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• FORK SPAN WIDTH: 0.187 INCHES NOMINAL IN
• DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 3.313 INCHES NOMINAL IN
• MATERIAL: NICKEL ALLOY OVERALL
• SURFACE TREATMENT: SILVER OVERALL
• FORK ARM THICKNESS: 0.125 INCHES NOMINAL IN
• FORK DEPTH: 0.563 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FORK SPAN WIDTH 0.187 INCHES NOMINAL IN DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END 3.313 INCHES NOMINAL IN STYLE DESIGNATOR CLEVIS MATERIAL NICKEL ALLOY OVERALL SURFACE TREATMENT SILVER OVERALL FORK ARM THICKNESS 0.125 INCHES NOMINAL IN FORK DEPTH 0.563 INCHES NOMINAL IN OVERALL WIDTH 0.438 INCHES NOMINAL IN END RADIUS 0.375 INCHES NOMINAL IN SHANK LENGTH 2.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
74197 Interchangeable interchangeable cross-reference
interchangeable
A-840808-01 Interchangeable interchangeable cross-reference
interchangeable
720 Interchangeable interchangeable cross-reference
interchangeable
D84-941-68PC17 Interchangeable interchangeable cross-reference
interchangeable
AGA10262 Interchangeable interchangeable cross-reference
interchangeable
VN0300L Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy D74197?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D74197?
D74197 is a CLEVIS,ROD END.
What parts can replace D74197?
There are 10 known substitutes for D74197: 74197, A-840808-01, 720 and 7 more. Substitute compatibility should be verified for your specific system.
Is D74197 still available?
D74197 is currently cancelled.