PartsTable
Technical Data Sheet
Download PDF

D7201-C — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D7201-C: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.437 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 7.220 INCHES NOMINAL IN, overall_length: 6.480 INCHES NOMINAL IN, special_features: CONTAINS NON-ASBESTOS MATERIALS, cross-sectional_thickness: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-074-8315, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D7201-C
NSN: 5330-01-074-8315
NIINs: 010748315, 015049118
FSC: 5330 — Packing and Gasket Materials
CAGE: 0G6N3 — INTERFACE SOLUTIONS, INC. DBA INTERFACE SOLUTIONS (USA)
SPECIFICATIONS
hole_diameter0.437 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width7.220 INCHES NOMINAL IN
overall_length6.480 INCHES NOMINAL IN
special_featuresCONTAINS NON-ASBESTOS MATERIALS
cross-sectional_thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-074-8315
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D7201-C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
SPECIAL FEATURES6 BOLT HOLES 0.406 IN. DIA IN
SUBSTITUTES & CROSS-REFERENCES 3
10479350Reference document
Same NSN cross-reference
Reference document — Informative reference only
12371011Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
DAX12456Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy D7201-C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D7201-C?
D7201-C is a GASKET.
What parts can replace D7201-C?
There are 3 known substitutes for D7201-C: 10479350, 12371011, DAX12456. Substitute compatibility should be verified for your specific system.
What is the NSN for D7201-C?
D7201-C is cataloged in the U.S. Government catalog under NSN 5330-01-074-8315. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D7201-C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.