PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D7-EA08-08NJ-10NJ-17
D7-EA08-08NJ-10NJ-17 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES SECOND END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE SECOND END, inside_diameter: 0.500 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-139-1854, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D7-EA08-08NJ-10NJ-17
NSN: 4720-01-139-1854
FSC: 4720
CAGE: 09505 — DAYCO INDUSTRIAL (CAN)
SPECIFICATIONS
seat_angle37.0 DEGREES SECOND END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE SECOND END
inside_diameter0.500 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.906 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure8000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES SECOND END IN
end_connection_designSTRAIGHT FIRST END
NSN4720-01-139-1854
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: D7-EA08-08NJ-10NJ-17 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
NOMINAL THREAD SIZE: 0.750 INCHES SECOND END IN
•
THREAD CLASS: 3B FIRST END
•
CONNECTION STYLE: SWIVEL NUT FLARE SECOND END
•
MINIMUM INSIDE BENDING RADIUS: 7.000 INCHES IN
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
END CONNECTION DESIGN: STRAIGHT SECOND END
•
THREAD SERIES DESIGNATOR: UNF FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
NOMINAL THREAD SIZE0.750 INCHES SECOND END IN
THREAD CLASS3B FIRST END
CONNECTION STYLESWIVEL NUT FLARE SECOND END
MINIMUM INSIDE BENDING RADIUS7.000 INCHES IN
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
END CONNECTION DESIGNSTRAIGHT SECOND END
THREAD SERIES DESIGNATORUNF FIRST END
THREAD DIRECTIONRIGHT-HAND SECOND END
OUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND WEATHERPROOF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
51171R1Interchangeable
interchangeable cross-reference
interchangeable
69172Interchangeable
interchangeable cross-reference
interchangeable
25SInterchangeable
interchangeable cross-reference
interchangeable
85217Interchangeable
interchangeable cross-reference
interchangeable
95901AInterchangeable
interchangeable cross-reference
interchangeable
95907A ITEM 5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D7-EA08-08NJ-10NJ-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D7-EA08-08NJ-10NJ-17?
D7-EA08-08NJ-10NJ-17 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace D7-EA08-08NJ-10NJ-17?
There are 6 known substitutes for D7-EA08-08NJ-10NJ-17: 51171R1, 69172, 25S and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D7-EA08-08NJ-10NJ-17?
D7-EA08-08NJ-10NJ-17 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-139-1854. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D7-EA08-08NJ-10NJ-17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026