PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D7-EA08-08MB-10NJ-15
D7-EA08-08MB-10NJ-15 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.500 INCHES NOMINAL IN, connection_style: PLAIN SECOND END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-138-6708, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D7-EA08-08MB-10NJ-15
NSN: 4720-01-138-6708
FSC: 4720
CAGE: 13174 — PARKER HANNIFIN CORP HOSE PRODUCTS DIV (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.500 INCHES NOMINAL IN
connection_stylePLAIN SECOND END
outside_diameter0.906 INCHES NOMINAL IN
thread_directionRIGHT-HAND SECOND END
operating_pressure2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure8000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.500 INCHES SECOND END IN
end_connection_designSTRAIGHT SECOND END
NSN4720-01-138-6708
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: D7-EA08-08MB-10NJ-15 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER COVERING ENVIRONMENTAL PROTECTION: OIL RESISTANT AND WEATHERPROOF
•
THREAD CLASS: 3B FIRST END
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
OUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND WEATHERPROOF
THREAD CLASS3B FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
END CONNECTION DESIGNSTRAIGHT SECOND END
THREAD SERIES DESIGNATORNPTF SECOND END
OUTSIDE DIAMETER0.906 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
78126Interchangeable
interchangeable cross-reference
interchangeable
MF15-2Interchangeable
interchangeable cross-reference
interchangeable
388693-7Interchangeable
interchangeable cross-reference
interchangeable
75017Interchangeable
interchangeable cross-reference
interchangeable
GGG-R-180Interchangeable
interchangeable cross-reference
interchangeable
B94.2 TABLE 13 17/64Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D7-EA08-08MB-10NJ-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D7-EA08-08MB-10NJ-15?
D7-EA08-08MB-10NJ-15 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace D7-EA08-08MB-10NJ-15?
There are 6 known substitutes for D7-EA08-08MB-10NJ-15: 78126, MF15-2, 388693-7 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D7-EA08-08MB-10NJ-15?
D7-EA08-08MB-10NJ-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-138-6708. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D7-EA08-08MB-10NJ-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026