PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D6SE-140GY
D6SE-140GY ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include width: 0.578 INCHES NOMINAL IN, material: STEEL OVERALL, thickness: 0.125 INCHES NOMINAL IN, hole_diameter: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: DEE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-632-8939, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D6SE-140GY
NSN: 5310-00-632-8939
FSC: 5310
CAGE: 85480 — BRADY UNITED STATES (USA)
SPECIFICATIONS
width0.578 INCHES NOMINAL IN
materialSTEEL OVERALL
thickness0.125 INCHES NOMINAL IN
hole_diameter0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleDEE
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-632-8939
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D6SE-140GY · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
HOLE DIAMETER: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
THICKNESS: 0.125 INCHES NOMINAL IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
WIDTH: 0.578 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: DEE
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
THICKNESS0.125 INCHES NOMINAL IN
CENTER HOLE SHAPE STYLEROUND
WIDTH0.578 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEDEE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
FA8-127-2Interchangeable
interchangeable cross-reference
interchangeable
D140Interchangeable
interchangeable cross-reference
interchangeable
107-026-2Interchangeable
interchangeable cross-reference
interchangeable
015329TInterchangeable
interchangeable cross-reference
interchangeable
06140Interchangeable
interchangeable cross-reference
interchangeable
D6-140Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D6SE-140GY?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D6SE-140GY?
D6SE-140GY is a WASHER,FLAT.
What parts can replace D6SE-140GY?
There are 12 known substitutes for D6SE-140GY: FA8-127-2, D140, 107-026-2 and 9 more. Substitute compatibility should be verified for your specific system.
Is D6SE-140GY still available?
D6SE-140GY is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D6SE-140GY

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026