PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D650-170556 REV F ITEM 10
D650-170556 REV F ITEM 10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include material: GLASS FIBER OVERALL, construction: ONE-PIECE, overall_length: 108.000 INCHES NOMINAL IN, style_designator: STRIP, cross-sectional_width: 0.120 INCHES NOMINAL IN, cross-sectional_height: 1.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-645-2470, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D650-170556 REV F ITEM 10
NSN: 5330-01-645-2470
FSC: 5330
CAGE: 17068 — DESPATCH INDUSTRIES LIMITED PARTNERSHIP DBA DESPATCH INDUSTRIES (USA)
SPECIFICATIONS
materialGLASS FIBER OVERALL
constructionONE-PIECE
overall_length108.000 INCHES NOMINAL IN
style_designatorSTRIP
cross-sectional_width0.120 INCHES NOMINAL IN
cross-sectional_height1.000 INCHES NOMINAL IN
end_item_identificationOVEN, THERMAL DRYING
cross-sectional_shape_styleRECTANGULAR
part_name_assigned_by_controlling_agencySEAL TAPE, FIBERGLASS
NSN5330-01-645-2470
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D650-170556 REV F ITEM 10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 1.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CONSTRUCTION: ONE-PIECE
•
CROSS-SECTIONAL WIDTH: 0.120 INCHES NOMINAL IN
•
MATERIAL: GLASS FIBER OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT1.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OVERALL LENGTH108.000 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
CROSS-SECTIONAL WIDTH0.120 INCHES NOMINAL IN
END ITEM IDENTIFICATIONOVEN, THERMAL DRYING
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL TAPE, FIBERGLASS
MATERIALGLASS FIBER OVERALL
STYLE DESIGNATORSTRIP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
903032Interchangeable
interchangeable cross-reference
interchangeable
903032-1Interchangeable
interchangeable cross-reference
interchangeable
E8230LSOInterchangeable
interchangeable cross-reference
interchangeable
03-0321Interchangeable
interchangeable cross-reference
interchangeable
6515NCM030216Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D650-170556 REV F ITEM 10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D650-170556 REV F ITEM 10?
D650-170556 REV F ITEM 10 is a SEAL,NONMETALLIC STRIP.
What parts can replace D650-170556 REV F ITEM 10?
There are 5 known substitutes for D650-170556 REV F ITEM 10: 903032, 903032-1, E8230LSO and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D650-170556 REV F ITEM 10?
D650-170556 REV F ITEM 10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-645-2470. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D650-170556 REV F ITEM 10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026