PartsTable
Technical Data Sheet
Download PDF

D61298PC48 — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D61298PC48: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 0.931 INCHES NOMINAL IN, material: RUBBER SYNTHETIC TOP RING, temp_rating: 250.0 FAHRENHEIT DEGF, inside_diameter: 0.500 INCHES NOMINAL IN, outside_diameter: 0.800 INCHES NOMINAL IN, cross-sectional_shape_style: V TOP RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-780-0962, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D61298PC48
NSN: 5330-00-780-0962
FSC: 5330 — Packing and Gasket Materials
CAGE: 70512 — SINGER CO THE METER DIV (USA)
SPECIFICATIONS
height0.931 INCHES NOMINAL IN
materialRUBBER SYNTHETIC TOP RING
temp_rating250.0 FAHRENHEIT DEGF
inside_diameter0.500 INCHES NOMINAL IN
outside_diameter0.800 INCHES NOMINAL IN
intermediate_ring_quantity3
cross-sectional_shape_styleV TOP RING
NSN5330-00-780-0962
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D61298PC48 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 250.0 FAHRENHEIT DEGF
•
INTERMEDIATE RING QUANTITY: 3
•
OUTSIDE DIAMETER: 0.800 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: V TOP RING
•
INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
HEIGHT: 0.931 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEMP RATING250.0 FAHRENHEIT DEGF
INTERMEDIATE RING QUANTITY3
OUTSIDE DIAMETER0.800 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEV TOP RING
CROSS-SECTIONAL SHAPE STYLEV BOTTOM RING
CROSS-SECTIONAL SHAPE STYLEV INTERMEDIATE RING
INSIDE DIAMETER0.500 INCHES NOMINAL IN
HEIGHT0.931 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC BOTTOM RING
MATERIALRUBBER SYNTHETIC TOP RING
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
A61285P022Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
61967G112Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy D61298PC48?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D61298PC48?
D61298PC48 is a PACKING ASSEMBLY.
What parts can replace D61298PC48?
There are 2 known substitutes for D61298PC48: A61285P022, 61967G112. Substitute compatibility should be verified for your specific system.
What is the NSN for D61298PC48?
D61298PC48 is cataloged in the U.S. Government catalog under NSN 5330-00-780-0962. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D61298PC48