PartsTable
Technical Data Sheet
PartsTable / MRO / D5118
D5118 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CAMERA-RECORDING,VIDEO is a the manufacturer cable assembly designed for reliable internal or external connectivity in enterprise server and storage environments. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, jaw_width: 32.0 MILLIMETERS NOMINAL MM, jaw_length: 35.0 MILLIMETERS NOMINAL MM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, overall_length: 205.0 MILLIMETERS NOMINAL MM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-005-2307, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ D5118
NSN: 5331-01-005-2307
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
jaw_width32.0 MILLIMETERS NOMINAL MM
jaw_length35.0 MILLIMETERS NOMINAL MM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
overall_length205.0 MILLIMETERS NOMINAL MM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter8.025 INCHES NOMINAL IN
special_featuresJAW THICKNESS 11MM; HANDLE FINISH PLASTIC DIPPED; HANDLE COLOR BLUE; WEIGHT .62 LBS LBS
features_providedWIRE CUTTER
surface_treatmentNICKEL AND CHROMIUM
center_hole_diameter7.430 INCHES MINIMUM AND 7.520 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
NSN5331-01-005-2307
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D5118 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 7.430 INCHES MINIMUM AND 7.520 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 8.025 INCHES NOMINAL IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER7.430 INCHES MINIMUM AND 7.520 INCHES MAXIMUM IN
OUTSIDE DIAMETER8.025 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
2443Interchangeable
interchangeable cross-reference
interchangeable
D15-716HPC377-378-406Interchangeable
interchangeable cross-reference
interchangeable
D15-716BPC377-378-406Interchangeable
interchangeable cross-reference
interchangeable
7415305Interchangeable
interchangeable cross-reference
interchangeable
819B3800B75Interchangeable
interchangeable cross-reference
interchangeable
10-18000-017Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D5118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D5118?
D5118 is a CAMERA-RECORDING,VIDEO. It is classified as a MRO (MRO_GENERAL).
What parts can replace D5118?
There are 22 known substitutes for D5118: 2443, D15-716HPC377-378-406, D15-716BPC377-378-406 and 19 more. Substitute compatibility should be verified for your specific system.
Is D5118 still available?
D5118 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D5118

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026