PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D500
D500 ✓ Verified by PartsTable
Ecovacs · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

DEEBOT 500 provides a versatile, everyday cleaning solution. With its multiple cleaning modes, DEEBOT 500 efficiently cleans your floor and has an appropriate cleaning mode for every job. You can control your robot with the ECOVACS Home App, a simple remote, or smart home system, and enjoy some free time while DEEBOT 500 cleans for you! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-081-6395, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
D500
NSN: 5330-00-081-6395
FSC: 5330
CAGE: 8E499 — KOEHRING CRANES AND EXCAVATORS INC SUB OF NORTHWEST ENGINEERING CO (USA)
SPECIFICATIONS
cushionNOT INCLUDED
cab_typeCONVENTIONAL
materialPLASTIC POLYCARBONATE LOCATION NOT OTHERWISE SPECIFIED
sterilitySTERILE
unit_typeWEIGHING SCALE
scale_nameAZIMUTH ANGLE
design_typeFOUR-WAY
scale_range+0.0 TO 500.0 POUNDS LBS
mounting_padNOT INCLUDED
cab_roof_typeCLOSED
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width9.40 MILLIMETERS NOMINAL MM
NSN5330-00-081-6395
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D500 MFR: Ecovacs ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE LENGTH: 2.250 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
•
APERTURE WIDTH: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH2.500 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OVERALL LENGTH3.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE LENGTH2.250 INCHES NOMINAL IN
MATERIALPAPER OVERALL
APERTURE WIDTH1.250 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
INSIDE CORNER RADIUS0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
D500Interchangeable
interchangeable cross-reference
interchangeable
ANC92PTAN5738-1Interchangeable
interchangeable cross-reference
interchangeable
MILC6132PTAN5738-1Interchangeable
interchangeable cross-reference
interchangeable
94Interchangeable
interchangeable cross-reference
interchangeable
40-7508AInterchangeable
interchangeable cross-reference
interchangeable
70-0251Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D500?
D500 is a RESISTOR,FIXED,WIRE WOUND,INDUCT manufactured by Ecovacs.
What parts can replace D500?
There are 14 known substitutes for D500: D500, ANC92PTAN5738-1, MILC6132PTAN5738-1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D500?
D500 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-081-6395. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D500

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026