D50-0070-ITEM 6 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

D50-0070-ITEM 6: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, center_hole_diameter: 0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN, cross-sectional_height: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-117-4744, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

D50-0070-ITEM 6

NSN: 5331-00-117-4744
FSC: 5331 — O-ring
CAGE: 65079 — DANCO VALVE COMPANY (USA)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
temp_rating	-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
center_hole_diameter	0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
cross-sectional_height	0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
NSN	5331-00-117-4744

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 3

M83248/2-906Reference document

Same NSN cross-reference

Reference document — Secondary reference

3-906S455-7Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS568-906Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedNo demilitarization required

Ready to buy D50-0070-ITEM 6?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is D50-0070-ITEM 6?

D50-0070-ITEM 6 is a O-RING.

What parts can replace D50-0070-ITEM 6?

There are 3 known substitutes for D50-0070-ITEM 6: M83248/2-906, 3-906S455-7, AS568-906. Substitute compatibility should be verified for your specific system.

What is the NSN for D50-0070-ITEM 6?

D50-0070-ITEM 6 is cataloged in the U.S. Government catalog under NSN 5331-00-117-4744. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

D50-0070-ITEM 6 — O-RING

Request a Quote — D50-0070-ITEM 6