PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D4524-1971-1
D4524-1971-1 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.062 INCHES NOMINAL IN, hole_diameter: 0.406 INCHES NOMINAL IN, overall_diameter: 0.938 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-837-3283, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D4524-1971-1
NSN: 5310-00-837-3283
FSC: 5310
CAGE: 60532 — TRANE U.S. INC. DBA THE TRANE CO DIV TRANE HEADQUARTERS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.062 INCHES NOMINAL IN
hole_diameter0.406 INCHES NOMINAL IN
overall_diameter0.938 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-837-3283
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D4524-1971-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.938 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.406 INCHES NOMINAL IN
•
THICKNESS: 0.062 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE SHAPE STYLEROUND
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.938 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL IN
THICKNESS0.062 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
106-53Interchangeable
interchangeable cross-reference
interchangeable
220-100-24Interchangeable
interchangeable cross-reference
interchangeable
WAS170Interchangeable
Same NIIN cross-reference
interchangeable
D4524-1971Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D4524-1971-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D4524-1971-1?
D4524-1971-1 is a WASHER,FLAT.
What parts can replace D4524-1971-1?
There are 4 known substitutes for D4524-1971-1: 106-53, 220-100-24, WAS170 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D4524-1971-1?
D4524-1971-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-837-3283. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D4524-1971-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026