PartsTable
Technical Data Sheet

D4160 ITEM 5,14,23 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.004 INCHES NOMINAL IN, center_hole_diameter: 0.855 INCHES MINIMUM AND 0.873 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5331-01-127-0849, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D4160 ITEM 5,14,23
NSN: 5331-01-127-0849
FSC: 5331 — O-RING
CAGE: 65079 — DANCO VALVE COMPANY (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter1.004 INCHES NOMINAL IN
center_hole_diameter0.855 INCHES MINIMUM AND 0.873 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-01-127-0849
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D4160 ITEM 5,14,23 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.855 INCHES MINIMUM AND 0.873 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.004 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS
CENTER HOLE DIAMETER0.855 INCHES MINIMUM AND 0.873 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.004 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
5331PL2174759InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
N2320InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
M83248/1-020InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
4564-020 EUInterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
AS3581-020InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
NAS1594-020InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D4160 ITEM 5,14,23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D4160 ITEM 5,14,23?
D4160 ITEM 5,14,23 is a O-RING.
What parts can replace D4160 ITEM 5,14,23?
There are 11 known substitutes for D4160 ITEM 5,14,23: 5331PL2174759, N2320, M83248/1-020 and 8 more. Substitute compatibility should be verified for your specific system.
Is D4160 ITEM 5,14,23 still available?
D4160 ITEM 5,14,23 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D4160 ITEM 5,14,23