PartsTable
Technical Data Sheet
D4160 ITEM 25 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.199 INCHES NOMINAL IN, center_hole_diameter: 0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-120-9550, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D4160 ITEM 25
NSN: 5331-01-120-9550
FSC: 5331 — O-RING
CAGE: 65079 — DANCO VALVE COMPANY (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter1.199 INCHES NOMINAL IN
center_hole_diameter0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-01-120-9550
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D4160 ITEM 25 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CENTER HOLE DIAMETER: 0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER: 1.199 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER1.199 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
AS568-213MIL-G- 23652 TY 1Interchangeable
interchangeable cross-reference
interchangeable
ARP568-213MILG23652TY1Interchangeable
interchangeable cross-reference
interchangeable
25-2859YPCAN629020Interchangeable
interchangeable cross-reference
interchangeable
M383-20Interchangeable
interchangeable cross-reference
interchangeable
10596841-13Interchangeable
interchangeable cross-reference
interchangeable
AS568-213MILG23652TY2CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy D4160 ITEM 25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D4160 ITEM 25?
D4160 ITEM 25 is a O-RING.
What parts can replace D4160 ITEM 25?
There are 22 known substitutes for D4160 ITEM 25: AS568-213MIL-G- 23652 TY 1, ARP568-213MILG23652TY1, 25-2859YPCAN629020 and 19 more. Substitute compatibility should be verified for your specific system.
Is D4160 ITEM 25 still available?
D4160 ITEM 25 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D4160 ITEM 25