PartsTable
Technical Data Sheet
Download PDF

D410 — TERMINAL,DATA PROCESSING

✓ Government record, cited
Samsung · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

D410: TERMINAL,DATA PROCESSING.

The TERMINAL,DATA PROCESSING is a Samsung industrial component. Key specifications include material: RUBBER SYNTHETIC TUBE, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.500 INCHES NOMINAL IN, outside_diameter: 0.899 INCHES MINIMUM AND 0.945 INCHES MAXIMUM IN, operating_pressure: 1750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-203-3029, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ D410
NSN: 4720-00-203-3029
NIINs: 002033029, 012599897
FSC: 4720 — Hose and Flexible Tubing
CAGE: 30327 — IMPERIAL (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.500 INCHES NOMINAL IN
outside_diameter0.899 INCHES MINIMUM AND 0.945 INCHES MAXIMUM IN
special_features12 IN. MONOCHROME TILT-BASE DISPLAY UNIT; 81 TO 136 COLUMN CHARACTER VIEWING SPACE; 107-KEY MAIN KEYPAD; 12-KY SCREEN MANAGEMENT KEYPAD; 14-KEY NUMERIC KEYPAD IN
operating_pressure1750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
media_for_which_designedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
hydrostatic_test_pressure3500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
nondefinitive_spec/std_data10 SIZE
NSN4720-00-203-3029
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K D410 Samsung NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN D410 MFR Samsung
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 5.500 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 0.899 INCHES MINIMUM AND 0.945 INCHES MAXIMUM IN
•
OPERATING PRESSURE: 1750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
SPECIFICATION/STANDARD DATA: 81343-SAE J517,100R5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
NONDEFINITIVE SPEC/STD DATA: 10 SIZE
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS5.500 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER0.899 INCHES MINIMUM AND 0.945 INCHES MAXIMUM IN
OPERATING PRESSURE1750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA81343-SAE J517,100R5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATA10 SIZE
INSIDE DIAMETER0.500 INCHES NOMINAL IN
INSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 10
J517Reference document
Same NSN cross-reference
Reference document — Secondary reference
331C194H05Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
211-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
A113954Reference document
Same NSN cross-reference
Reference document — Secondary reference
9119724Reference document
Same NSN cross-reference
Reference document — Secondary reference
319709R1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy D410?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D410?
D410 is a TERMINAL,DATA PROCESSING manufactured by Samsung. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace D410?
There are 10 known substitutes for D410: J517, 331C194H05, 211-10 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D410?
D410 is cataloged in the U.S. Government catalog under NSN 4720-00-203-3029. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D410

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.