PartsTable
Technical Data Sheet
Download PDF

D4060FFITEM1 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

D4060FFITEM1: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, end_item_identification: 4 IN BY 6 IN VALVE, ANGLE RELIEF; CVN77 SHIP IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-536-4076, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D4060FFITEM1
NSN: 5331-01-536-4076
FSC: 5331 — O-ring
CAGE: 5P967 — DANTE VALVE COMPANY (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating70.0 SHORE DUROMETER A NOMINAL
end_item_identification4 IN BY 6 IN VALVE, ANGLE RELIEF; CVN77 SHIP IN
material_document_and_classificationSAE AMS 3216G ASSN STD SINGLE MATERIAL RESPONSE AND SAE AMS 3218C ASSN STD SINGLE MATERIAL RESPONSE AND SAE AMS 7259D ASSN STD SINGLE MATERIAL RESPONSE G
NSN5331-01-536-4076
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D4060FFITEM1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE AMS 3216G ASSN STD SINGLE MATERIAL RESPONSE AND SAE AMS 3218C ASSN STD SINGLE MATERIAL RESPONSE AND SAE AMS 7259D ASSN STD SINGLE MATERIAL RESPONSE G
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE AMS 3216G ASSN STD SINGLE MATERIAL RESPONSE AND SAE AMS 3218C ASSN STD SINGLE MATERIAL RESPONSE AND SAE AMS 7259D ASSN STD SINGLE MATERIAL RESPONSE G
END ITEM IDENTIFICATION4 IN BY 6 IN VALVE, ANGLE RELIEF; CVN77 SHIP IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
AS568-350Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy D4060FFITEM1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D4060FFITEM1?
D4060FFITEM1 is a O-RING.
What parts can replace D4060FFITEM1?
There is 1 known substitute for D4060FFITEM1: AS568-350. Substitute compatibility should be verified for your specific system.
What is the NSN for D4060FFITEM1?
D4060FFITEM1 is cataloged in the U.S. Government catalog under NSN 5331-01-536-4076. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D4060FFITEM1