PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D40 ITEM 10
D40 ITEM 10 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,PIVOT is a the manufacturer industrial component. Key specifications include material: ALUMINUM CASE, duty_type: CONTINUOUS, body_style: O-FRAME, body_width: 1.437 INCHES NOMINAL IN, body_height: 1.625 INCHES NOMINAL IN, body_length: 1.562 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-546-5444, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D40 ITEM 10
NSN: 3110-01-546-5444
FSC: 3110
CAGE: 65079 — DANCO VALVE COMPANY (USA)
SPECIFICATIONS
materialALUMINUM CASE
duty_typeCONTINUOUS
body_styleO-FRAME
body_width1.437 INCHES NOMINAL IN
body_height1.625 INCHES NOMINAL IN
body_length1.562 INCHES NOMINAL IN
current_rating0.375 AMPERES NOMINAL
inclosure_typePARTIALLY INCLOSED, SHELL
actuator_length0.500 INCHES NOMINAL IN
special_featuresCOMES WITH AN ADAPTER IN THE DRAIN PAN FOR A HOSE TO BE CONNECTED FOR UNATTENDED DRAINAGE
actuator_diameter0.437 INCHES NOMINAL IN
link_row_quantity2
NSN3110-01-546-5444
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: D40 ITEM 10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
1121-0117Interchangeable
interchangeable cross-reference
interchangeable
D-40Interchangeable
interchangeable cross-reference
interchangeable
DS-40Interchangeable
interchangeable cross-reference
interchangeable
40-2Interchangeable
interchangeable cross-reference
interchangeable
RC0040Interchangeable
interchangeable cross-reference
interchangeable
ASME B29.100 40-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D40 ITEM 10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D40 ITEM 10?
D40 ITEM 10 is a BEARING,BALL,PIVOT.
What parts can replace D40 ITEM 10?
There are 14 known substitutes for D40 ITEM 10: 1121-0117, D-40, DS-40 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D40 ITEM 10?
D40 ITEM 10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-546-5444. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D40 ITEM 10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026